/*
    ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
                 2011,2012 Giovanni Di Sirio.

    This file is part of ChibiOS/RT.

    ChibiOS/RT is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 3 of the License, or
    (at your option) any later version.

    ChibiOS/RT is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.

                                      ---

    A special exception to the GPL can be applied should you wish to distribute
    a combined work that includes ChibiOS/RT, without being obliged to provide
    the source code for any proprietary components. See the file exception.txt
    for full details of how and when the exception can be applied.
*/

/**
 * @file    STM32/GPIOv1/pal_lld.c
 * @brief   STM32F1xx GPIO low level driver code.
 *
 * @addtogroup PAL
 * @{
 */

#include "ch.h"
#include "hal.h"

#if HAL_USE_PAL || defined(__DOXYGEN__)

#if STM32_HAS_GPIOG
#define APB2_EN_MASK  (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN |            \
                       RCC_APB2ENR_IOPCEN | RCC_APB2ENR_IOPDEN |            \
                       RCC_APB2ENR_IOPEEN | RCC_APB2ENR_IOPFEN |            \
                       RCC_APB2ENR_IOPGEN | RCC_APB2ENR_AFIOEN)
#elif STM32_HAS_GPIOE
#define APB2_EN_MASK  (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN |            \
                       RCC_APB2ENR_IOPCEN | RCC_APB2ENR_IOPDEN |            \
                       RCC_APB2ENR_IOPEEN | RCC_APB2ENR_AFIOEN)
#else
#define APB2_EN_MASK  (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN |            \
                       RCC_APB2ENR_IOPCEN | RCC_APB2ENR_IOPDEN |            \
                       RCC_APB2ENR_AFIOEN)
#endif

/*===========================================================================*/
/* Driver exported variables.                                                */
/*===========================================================================*/

/*===========================================================================*/
/* Driver local variables.                                                   */
/*===========================================================================*/

/*===========================================================================*/
/* Driver local functions.                                                   */
/*===========================================================================*/

/*===========================================================================*/
/* Driver interrupt handlers.                                                */
/*===========================================================================*/

/*===========================================================================*/
/* Driver exported functions.                                                */
/*===========================================================================*/

/**
 * @brief   STM32 I/O ports configuration.
 * @details Ports A-D(E, F, G) clocks enabled, AFIO clock enabled.
 *
 * @param[in] config    the STM32 ports configuration
 *
 * @notapi
 */
void _pal_lld_init(const PALConfig *config) {

  /*
   * Enables the GPIO related clocks.
   */
  rccEnableAPB2(APB2_EN_MASK, FALSE);

  /*
   * Initial GPIO setup.
   */
  GPIOA->ODR = config->PAData.odr;
  GPIOA->CRH = config->PAData.crh;
  GPIOA->CRL = config->PAData.crl;
  GPIOB->ODR = config->PBData.odr;
  GPIOB->CRH = config->PBData.crh;
  GPIOB->CRL = config->PBData.crl;
  GPIOC->ODR = config->PCData.odr;
  GPIOC->CRH = config->PCData.crh;
  GPIOC->CRL = config->PCData.crl;
  GPIOD->ODR = config->PDData.odr;
  GPIOD->CRH = config->PDData.crh;
  GPIOD->CRL = config->PDData.crl;
#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
  GPIOE->ODR = config->PEData.odr;
  GPIOE->CRH = config->PEData.crh;
  GPIOE->CRL = config->PEData.crl;
#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
  GPIOF->ODR = config->PFData.odr;
  GPIOF->CRH = config->PFData.crh;
  GPIOF->CRL = config->PFData.crl;
#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
  GPIOG->ODR = config->PGData.odr;
  GPIOG->CRH = config->PGData.crh;
  GPIOG->CRL = config->PGData.crl;
#endif
#endif
#endif
}

/**
 * @brief   Pads mode setup.
 * @details This function programs a pads group belonging to the same port
 *          with the specified mode.
 * @note    @p PAL_MODE_UNCONNECTED is implemented as push pull output at 2MHz.
 * @note    Writing on pads programmed as pull-up or pull-down has the side
 *          effect to modify the resistor setting because the output latched
 *          data is used for the resistor selection.
 *
 * @param[in] port      the port identifier
 * @param[in] mask      the group mask
 * @param[in] mode      the mode
 *
 * @notapi
 */
void _pal_lld_setgroupmode(ioportid_t port,
                           ioportmask_t mask,
                           iomode_t mode) {
  static const uint8_t cfgtab[] = {
    4,          /* PAL_MODE_RESET, implemented as input.*/
    2,          /* PAL_MODE_UNCONNECTED, implemented as push pull output 2MHz.*/
    4,          /* PAL_MODE_INPUT */
    8,          /* PAL_MODE_INPUT_PULLUP */
    8,          /* PAL_MODE_INPUT_PULLDOWN */
    0,          /* PAL_MODE_INPUT_ANALOG */
    3,          /* PAL_MODE_OUTPUT_PUSHPULL, 50MHz.*/
    7,          /* PAL_MODE_OUTPUT_OPENDRAIN, 50MHz.*/
    8,          /* Reserved.*/
    8,          /* Reserved.*/
    8,          /* Reserved.*/
    8,          /* Reserved.*/
    8,          /* Reserved.*/
    8,          /* Reserved.*/
    8,          /* Reserved.*/
    8,          /* Reserved.*/
    0xB,        /* PAL_MODE_STM32_ALTERNATE_PUSHPULL, 50MHz.*/
    0xF,        /* PAL_MODE_STM32_ALTERNATE_OPENDRAIN, 50MHz.*/
  };
  uint32_t mh, ml, crh, crl, cfg;
  unsigned i;

  if (mode == PAL_MODE_INPUT_PULLUP)
    port->BSRR = mask;
  else if (mode == PAL_MODE_INPUT_PULLDOWN)
    port->BRR = mask;
  cfg = cfgtab[mode];
  mh = ml = crh = crl = 0;
  for (i = 0; i < 8; i++) {
    ml <<= 4;
    mh <<= 4;
    crl <<= 4;
    crh <<= 4;
    if ((mask & 0x0080) == 0)
      ml |= 0xf;
    else
      crl |= cfg;
    if ((mask & 0x8000) == 0)
      mh |= 0xf;
    else
      crh |= cfg;
    mask <<= 1;
  }
  port->CRH = (port->CRH & mh) | crh;
  port->CRL = (port->CRL & ml) | crl;
}

#endif /* HAL_USE_PAL */

/** @} */