/* ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, 2011,2012 Giovanni Di Sirio. This file is part of ChibiOS/RT. ChibiOS/RT is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. ChibiOS/RT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . --- A special exception to the GPL can be applied should you wish to distribute a combined work that includes ChibiOS/RT, without being obliged to provide the source code for any proprietary components. See the file exception.txt for full details of how and when the exception can be applied. */ /*-* * @file mii.h * @brief MII Driver macros and structures. * * @addtogroup MII * @{ */ #ifndef _MII_H_ #define _MII_H_ /* * Generic MII registers. Note, not all registers are present on all PHY * devices and some extra registers may be present. */ #define MII_BMCR 0x00 /**< Basic mode control register. */ #define MII_BMSR 0x01 /**< Basic mode status register. */ #define MII_PHYSID1 0x02 /**< PHYS ID 1. */ #define MII_PHYSID2 0x03 /**< PHYS ID 2. */ #define MII_ADVERTISE 0x04 /**< Advertisement control reg. */ #define MII_LPA 0x05 /**< Link partner ability reg. */ #define MII_EXPANSION 0x06 /**< Expansion register. */ #define MII_CTRL1000 0x09 /**< 1000BASE-T control. */ #define MII_STAT1000 0x0a /**< 1000BASE-T status. */ #define MII_ESTATUS 0x0f /**< Extended Status. */ #define MII_DCOUNTER 0x12 /**< Disconnect counter. */ #define MII_FCSCOUNTER 0x13 /**< False carrier counter. */ #define MII_NWAYTEST 0x14 /**< N-way auto-neg test reg. */ #define MII_RERRCOUNTER 0x15 /**< Receive error counter. */ #define MII_SREVISION 0x16 /**< Silicon revision. */ #define MII_RESV1 0x17 /**< Reserved. */ #define MII_LBRERROR 0x18 /**< Lpback, rx, bypass error. */ #define MII_PHYADDR 0x19 /**< PHY address. */ #define MII_RESV2 0x1a /**< Reserved. */ #define MII_TPISTATUS 0x1b /**< TPI status for 10mbps. */ #define MII_NCONFIG 0x1c /**< Network interface config. */ /* * Basic mode control register. */ #define BMCR_RESV 0x003f /**< Unused. */ #define BMCR_SPEED1000 0x0040 /**< MSB of Speed (1000). */ #define BMCR_CTST 0x0080 /**< Collision test. */ #define BMCR_FULLDPLX 0x0100 /**< Full duplex. */ #define BMCR_ANRESTART 0x0200 /**< Auto negotiation restart. */ #define BMCR_ISOLATE 0x0400 /**< Disconnect DP83840 from MII. */ #define BMCR_PDOWN 0x0800 /**< Powerdown. */ #define BMCR_ANENABLE 0x1000 /**< Enable auto negotiation. */ #define BMCR_SPEED100 0x2000 /**< Select 100Mbps. */ #define BMCR_LOOPBACK 0x4000 /**< TXD loopback bits. */ #define BMCR_RESET 0x8000 /**< Reset. */ /* * Basic mode status register. */ #define BMSR_ERCAP 0x0001 /**< Ext-reg capability. */ #define BMSR_JCD 0x0002 /**< Jabber detected. */ #define BMSR_LSTATUS 0x0004 /**< Link status. */ #define BMSR_ANEGCAPABLE 0x0008 /**< Able to do auto-negotiation. */ #define BMSR_RFAULT 0x0010 /**< Remote fault detected. */ #define BMSR_ANEGCOMPLETE 0x0020 /**< Auto-negotiation complete. */ #define BMSR_RESV 0x00c0 /**< Unused. */ #define BMSR_ESTATEN 0x0100 /**< Extended Status in R15. */ #define BMSR_100HALF2 0x0200 /**< Can do 100BASE-T2 HDX. */ #define BMSR_100FULL2 0x0400 /**< Can do 100BASE-T2 FDX. */ #define BMSR_10HALF 0x0800 /**< Can do 10mbps, half-duplex. */ #define BMSR_10FULL 0x1000 /**< Can do 10mbps, full-duplex. */ #define BMSR_100HALF 0x2000 /**< Can do 100mbps, half-duplex. */ #define BMSR_100FULL 0x4000 /**< Can do 100mbps, full-duplex. */ #define BMSR_100BASE4 0x8000 /**< Can do 100mbps, 4k packets. */ /* * Advertisement control register. */ #define ADVERTISE_SLCT 0x001f /**< Selector bits. */ #define ADVERTISE_CSMA 0x0001 /**< Only selector supported. */ #define ADVERTISE_10HALF 0x0020 /**< Try for 10mbps half-duplex. */ #define ADVERTISE_1000XFULL 0x0020 /**< Try for 1000BASE-X full-duplex.*/ #define ADVERTISE_10FULL 0x0040 /**< Try for 10mbps full-duplex. */ #define ADVERTISE_1000XHALF 0x0040 /**< Try for 1000BASE-X half-duplex.*/ #define ADVERTISE_100HALF 0x0080 /**< Try for 100mbps half-duplex. */ #define ADVERTISE_1000XPAUSE 0x0080 /**< Try for 1000BASE-X pause. */ #define ADVERTISE_100FULL 0x0100 /**< Try for 100mbps full-duplex. */ #define ADVERTISE_1000XPSE_ASYM 0x0100 /**< Try for 1000BASE-X asym pause. */ #define ADVERTISE_100BASE4 0x0200 /**< Try for 100mbps 4k packets. */ #define ADVERTISE_PAUSE_CAP 0x0400 /**< Try for pause. */ #define ADVERTISE_PAUSE_ASYM 0x0800 /**< Try for asymetric pause. */ #define ADVERTISE_RESV 0x1000 /**< Unused. */ #define ADVERTISE_RFAULT 0x2000 /**< Say we can detect faults. */ #define ADVERTISE_LPACK 0x4000 /**< Ack link partners response. */ #define ADVERTISE_NPAGE 0x8000 /**< Next page bit. */ #define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \ ADVERTISE_CSMA) #define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \ ADVERTISE_100HALF | ADVERTISE_100FULL) /* * Link partner ability register. */ #define LPA_SLCT 0x001f /**< Same as advertise selector. */ #define LPA_10HALF 0x0020 /**< Can do 10mbps half-duplex. */ #define LPA_1000XFULL 0x0020 /**< Can do 1000BASE-X full-duplex. */ #define LPA_10FULL 0x0040 /**< Can do 10mbps full-duplex. */ #define LPA_1000XHALF 0x0040 /**< Can do 1000BASE-X half-duplex. */ #define LPA_100HALF 0x0080 /**< Can do 100mbps half-duplex. */ #define LPA_1000XPAUSE 0x0080 /**< Can do 1000BASE-X pause. */ #define LPA_100FULL 0x0100 /**< Can do 100mbps full-duplex. */ #define LPA_1000XPAUSE_ASYM 0x0100 /**< Can do 1000BASE-X pause asym. */ #define LPA_100BASE4 0x0200 /**< Can do 100mbps 4k packets. */ #define LPA_PAUSE_CAP 0x0400 /**< Can pause. */ #define LPA_PAUSE_ASYM 0x0800 /**< Can pause asymetrically. */ #define LPA_RESV 0x1000 /**< Unused. */ #define LPA_RFAULT 0x2000 /**< Link partner faulted. */ #define LPA_LPACK 0x4000 /**< Link partner acked us. */ #define LPA_NPAGE 0x8000 /**< Next page bit. */ #define LPA_DUPLEX (LPA_10FULL | LPA_100FULL) #define LPA_100 (LPA_100FULL | LPA_100HALF | LPA_100BASE4) /* * Expansion register for auto-negotiation. */ #define EXPANSION_NWAY 0x0001 /**< Can do N-way auto-nego. */ #define EXPANSION_LCWP 0x0002 /**< Got new RX page code word. */ #define EXPANSION_ENABLENPAGE 0x0004 /**< This enables npage words. */ #define EXPANSION_NPCAPABLE 0x0008 /**< Link partner supports npage. */ #define EXPANSION_MFAULTS 0x0010 /**< Multiple faults detected. */ #define EXPANSION_RESV 0xffe0 /**< Unused. */ #define ESTATUS_1000_TFULL 0x2000 /**< Can do 1000BT Full. */ #define ESTATUS_1000_THALF 0x1000 /**< Can do 1000BT Half. */ /* * N-way test register. */ #define NWAYTEST_RESV1 0x00ff /**< Unused. */ #define NWAYTEST_LOOPBACK 0x0100 /**< Enable loopback for N-way. */ #define NWAYTEST_RESV2 0xfe00 /**< Unused. */ /* * 1000BASE-T Control register. */ #define ADVERTISE_1000FULL 0x0200 /**< Advertise 1000BASE-T full duplex.*/ #define ADVERTISE_1000HALF 0x0100 /**< Advertise 1000BASE-T half duplex.*/ /* * 1000BASE-T Status register. */ #define LPA_1000LOCALRXOK 0x2000 /**< Link partner local receiver status.*/ #define LPA_1000REMRXOK 0x1000 /**< Link partner remote receiver status.*/ #define LPA_1000FULL 0x0800 /**< Link partner 1000BASE-T full duplex.*/ #define LPA_1000HALF 0x0400 /**< Link partner 1000BASE-T half duplex.*/ /* * PHY identifiers. */ #define MII_DM9161_ID 0x0181b8a0 #define MII_AM79C875_ID 0x00225540 #define MII_KS8721_ID 0x00221610 #define MII_STE101P_ID 0x00061C50 #endif /* _MII_H_ */ /** @} */