pal_lld.h
13.3 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011,2012 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
---
A special exception to the GPL can be applied should you wish to distribute
a combined work that includes ChibiOS/RT, without being obliged to provide
the source code for any proprietary components. See the file exception.txt
for full details of how and when the exception can be applied.
*/
/**
* @file STM32/GPIOv2/pal_lld.h
* @brief STM32L1xx/STM32F2xx/STM32F4xx GPIO low level driver header.
*
* @addtogroup PAL
* @{
*/
#ifndef _PAL_LLD_H_
#define _PAL_LLD_H_
#if HAL_USE_PAL || defined(__DOXYGEN__)
/*===========================================================================*/
/* Unsupported modes and specific modes */
/*===========================================================================*/
#undef PAL_MODE_RESET
#undef PAL_MODE_UNCONNECTED
#undef PAL_MODE_INPUT
#undef PAL_MODE_INPUT_PULLUP
#undef PAL_MODE_INPUT_PULLDOWN
#undef PAL_MODE_INPUT_ANALOG
#undef PAL_MODE_OUTPUT_PUSHPULL
#undef PAL_MODE_OUTPUT_OPENDRAIN
/**
* @name STM32-specific I/O mode flags
* @{
*/
#define PAL_STM32_MODE_MASK (3 << 0)
#define PAL_STM32_MODE_INPUT (0 << 0)
#define PAL_STM32_MODE_OUTPUT (1 << 0)
#define PAL_STM32_MODE_ALTERNATE (2 << 0)
#define PAL_STM32_MODE_ANALOG (3 << 0)
#define PAL_STM32_OTYPE_MASK (1 << 2)
#define PAL_STM32_OTYPE_PUSHPULL (0 << 2)
#define PAL_STM32_OTYPE_OPENDRAIN (1 << 2)
#define PAL_STM32_OSPEED_MASK (3 << 3)
#define PAL_STM32_OSPEED_LOWEST (0 << 3)
#define PAL_STM32_OSPEED_MID1 (1 << 3)
#define PAL_STM32_OSPEED_MID2 (2 << 3)
#define PAL_STM32_OSPEED_HIGHEST (3 << 3)
#define PAL_STM32_PUDR_MASK (3 << 5)
#define PAL_STM32_PUDR_FLOATING (0 << 5)
#define PAL_STM32_PUDR_PULLUP (1 << 5)
#define PAL_STM32_PUDR_PULLDOWN (2 << 5)
#define PAL_STM32_ALTERNATE_MASK (15 << 7)
#define PAL_STM32_ALTERNATE(n) ((n) << 7)
/**
* @brief Alternate function.
*
* @param[in] n alternate function selector
*/
#define PAL_MODE_ALTERNATE(n) (PAL_STM32_MODE_ALTERNATE | \
PAL_STM32_ALTERNATE(n))
/** @} */
/**
* @name Standard I/O mode flags
* @{
*/
/**
* @brief This mode is implemented as input.
*/
#define PAL_MODE_RESET PAL_STM32_MODE_INPUT
/**
* @brief This mode is implemented as output.
*/
#define PAL_MODE_UNCONNECTED PAL_STM32_MODE_OUTPUT
/**
* @brief Regular input high-Z pad.
*/
#define PAL_MODE_INPUT PAL_STM32_MODE_INPUT
/**
* @brief Input pad with weak pull up resistor.
*/
#define PAL_MODE_INPUT_PULLUP (PAL_STM32_MODE_INPUT | \
PAL_STM32_PUDR_PULLUP)
/**
* @brief Input pad with weak pull down resistor.
*/
#define PAL_MODE_INPUT_PULLDOWN (PAL_STM32_MODE_INPUT | \
PAL_STM32_PUDR_PULLDOWN)
/**
* @brief Analog input mode.
*/
#define PAL_MODE_INPUT_ANALOG PAL_STM32_MODE_ANALOG
/**
* @brief Push-pull output pad.
*/
#define PAL_MODE_OUTPUT_PUSHPULL (PAL_STM32_MODE_OUTPUT | \
PAL_STM32_OTYPE_PUSHPULL)
/**
* @brief Open-drain output pad.
*/
#define PAL_MODE_OUTPUT_OPENDRAIN (PAL_STM32_MODE_OUTPUT | \
PAL_STM32_OTYPE_OPENDRAIN)
/** @} */
/*===========================================================================*/
/* I/O Ports Types and constants. */
/*===========================================================================*/
/**
* @brief STM32 GPIO registers block.
*/
typedef struct {
volatile uint32_t MODER;
volatile uint32_t OTYPER;
volatile uint32_t OSPEEDR;
volatile uint32_t PUPDR;
volatile uint32_t IDR;
volatile uint32_t ODR;
volatile union {
uint32_t W;
struct {
uint16_t set;
uint16_t clear;
} H;
} BSRR;
volatile uint32_t LCKR;
volatile uint32_t AFRL;
volatile uint32_t AFRH;
} GPIO_TypeDef;
/**
* @brief GPIO port setup info.
*/
typedef struct {
/** Initial value for MODER register.*/
uint32_t moder;
/** Initial value for OTYPER register.*/
uint32_t otyper;
/** Initial value for OSPEEDR register.*/
uint32_t ospeedr;
/** Initial value for PUPDR register.*/
uint32_t pupdr;
/** Initial value for ODR register.*/
uint32_t odr;
/** Initial value for AFRL register.*/
uint32_t afrl;
/** Initial value for AFRH register.*/
uint32_t afrh;
} stm32_gpio_setup_t;
/**
* @brief STM32 GPIO static initializer.
* @details An instance of this structure must be passed to @p palInit() at
* system startup time in order to initialize the digital I/O
* subsystem. This represents only the initial setup, specific pads
* or whole ports can be reprogrammed at later time.
*/
typedef struct {
/** @brief Port A setup data.*/
stm32_gpio_setup_t PAData;
/** @brief Port B setup data.*/
stm32_gpio_setup_t PBData;
/** @brief Port C setup data.*/
stm32_gpio_setup_t PCData;
/** @brief Port D setup data.*/
stm32_gpio_setup_t PDData;
#if STM32_HAS_GPIOE
/** @brief Port E setup data.*/
stm32_gpio_setup_t PEData;
#endif
#if STM32_HAS_GPIOF
/** @brief Port F setup data.*/
stm32_gpio_setup_t PFData;
#endif
#if STM32_HAS_GPIOG
/** @brief Port G setup data.*/
stm32_gpio_setup_t PGData;
#endif
#if STM32_HAS_GPIOH
/** @brief Port H setup data.*/
stm32_gpio_setup_t PHData;
#endif
#if STM32_HAS_GPIOI
/** @brief Port I setup data.*/
stm32_gpio_setup_t PIData;
#endif
} PALConfig;
/**
* @brief Width, in bits, of an I/O port.
*/
#define PAL_IOPORTS_WIDTH 16
/**
* @brief Whole port mask.
* @details This macro specifies all the valid bits into a port.
*/
#define PAL_WHOLE_PORT ((ioportmask_t)0xFFFF)
/**
* @brief Digital I/O port sized unsigned type.
*/
typedef uint32_t ioportmask_t;
/**
* @brief Digital I/O modes.
*/
typedef uint32_t iomode_t;
/**
* @brief Port Identifier.
* @details This type can be a scalar or some kind of pointer, do not make
* any assumption about it, use the provided macros when populating
* variables of this type.
*/
typedef GPIO_TypeDef * ioportid_t;
/*===========================================================================*/
/* I/O Ports Identifiers. */
/* The low level driver wraps the definitions already present in the STM32 */
/* firmware library. */
/*===========================================================================*/
/**
* @brief GPIO port A identifier.
*/
#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
#define IOPORT1 GPIOA
#endif
/**
* @brief GPIO port B identifier.
*/
#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
#define IOPORT2 GPIOB
#endif
/**
* @brief GPIO port C identifier.
*/
#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
#define IOPORT3 GPIOC
#endif
/**
* @brief GPIO port D identifier.
*/
#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
#define IOPORT4 GPIOD
#endif
/**
* @brief GPIO port E identifier.
*/
#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
#define IOPORT5 GPIOE
#endif
/**
* @brief GPIO port F identifier.
*/
#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
#define IOPORT6 GPIOF
#endif
/**
* @brief GPIO port G identifier.
*/
#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
#define IOPORT7 GPIOG
#endif
/**
* @brief GPIO port H identifier.
*/
#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
#define IOPORT8 GPIOH
#endif
/**
* @brief GPIO port I identifier.
*/
#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
#define IOPORT9 GPIOI
#endif
/*===========================================================================*/
/* Implementation, some of the following macros could be implemented as */
/* functions, if so please put them in pal_lld.c. */
/*===========================================================================*/
/**
* @brief GPIO ports subsystem initialization.
*
* @notapi
*/
#define pal_lld_init(config) _pal_lld_init(config)
/**
* @brief Reads an I/O port.
* @details This function is implemented by reading the GPIO IDR register, the
* implementation has no side effects.
* @note This function is not meant to be invoked directly by the application
* code.
*
* @param[in] port port identifier
* @return The port bits.
*
* @notapi
*/
#define pal_lld_readport(port) ((port)->IDR)
/**
* @brief Reads the output latch.
* @details This function is implemented by reading the GPIO ODR register, the
* implementation has no side effects.
* @note This function is not meant to be invoked directly by the application
* code.
*
* @param[in] port port identifier
* @return The latched logical states.
*
* @notapi
*/
#define pal_lld_readlatch(port) ((port)->ODR)
/**
* @brief Writes on a I/O port.
* @details This function is implemented by writing the GPIO ODR register, the
* implementation has no side effects.
*
* @param[in] port port identifier
* @param[in] bits bits to be written on the specified port
*
* @notapi
*/
#define pal_lld_writeport(port, bits) ((port)->ODR = (bits))
/**
* @brief Sets a bits mask on a I/O port.
* @details This function is implemented by writing the GPIO BSRR register, the
* implementation has no side effects.
*
* @param[in] port port identifier
* @param[in] bits bits to be ORed on the specified port
*
* @notapi
*/
#define pal_lld_setport(port, bits) ((port)->BSRR.H.set = (uint16_t)(bits))
/**
* @brief Clears a bits mask on a I/O port.
* @details This function is implemented by writing the GPIO BSRR register, the
* implementation has no side effects.
*
* @param[in] port port identifier
* @param[in] bits bits to be cleared on the specified port
*
* @notapi
*/
#define pal_lld_clearport(port, bits) ((port)->BSRR.H.clear = (uint16_t)(bits))
/**
* @brief Writes a group of bits.
* @details This function is implemented by writing the GPIO BSRR register, the
* implementation has no side effects.
*
* @param[in] port port identifier
* @param[in] mask group mask
* @param[in] offset the group bit offset within the port
* @param[in] bits bits to be written. Values exceeding the group
* width are masked.
*
* @notapi
*/
#define pal_lld_writegroup(port, mask, offset, bits) \
((port)->BSRR.W = ((~(bits) & (mask)) << (16 + (offset))) | \
(((bits) & (mask)) << (offset)))
/**
* @brief Pads group mode setup.
* @details This function programs a pads group belonging to the same port
* with the specified mode.
*
* @param[in] port port identifier
* @param[in] mask group mask
* @param[in] offset group bit offset within the port
* @param[in] mode group mode
*
* @notapi
*/
#define pal_lld_setgroupmode(port, mask, offset, mode) \
_pal_lld_setgroupmode(port, mask << offset, mode)
/**
* @brief Writes a logical state on an output pad.
*
* @param[in] port port identifier
* @param[in] pad pad number within the port
* @param[in] bit logical value, the value must be @p PAL_LOW or
* @p PAL_HIGH
*
* @notapi
*/
#define pal_lld_writepad(port, pad, bit) pal_lld_writegroup(port, 1, pad, bit)
extern const PALConfig pal_default_config;
#ifdef __cplusplus
extern "C" {
#endif
void _pal_lld_init(const PALConfig *config);
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
iomode_t mode);
#ifdef __cplusplus
}
#endif
#endif /* HAL_USE_PAL */
#endif /* _PAL_LLD_H_ */
/** @} */