pal_lld.h
6.23 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011,2012 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
---
A special exception to the GPL can be applied should you wish to distribute
a combined work that includes ChibiOS/RT, without being obliged to provide
the source code for any proprietary components. See the file exception.txt
for full details of how and when the exception can be applied.
*/
/**
* @file Posix/pal_lld.h
* @brief Posix low level simulated PAL driver header.
*
* @addtogroup POSIX_PAL
* @{
*/
#ifndef _PAL_LLD_H_
#define _PAL_LLD_H_
#if HAL_USE_PAL || defined(__DOXYGEN__)
/*===========================================================================*/
/* Unsupported modes and specific modes */
/*===========================================================================*/
#undef PAL_MODE_INPUT_PULLUP
#undef PAL_MODE_INPUT_PULLDOWN
#undef PAL_MODE_OUTPUT_OPENDRAIN
#undef PAL_MODE_INPUT_ANALOG
/*===========================================================================*/
/* I/O Ports Types and constants. */
/*===========================================================================*/
/**
* @brief VIO port structure.
*/
typedef struct {
/**
* @brief VIO_LATCH register.
* @details This register represents the output latch of the VIO port.
*/
uint32_t latch;
/**
* @brief VIO_PIN register.
* @details This register represents the logical level at the VIO port
* pin level.
*/
uint32_t pin;
/**
* @brief VIO_DIR register.
* @details Direction of the VIO port bits, 0=input, 1=output.
*/
uint32_t dir;
} sim_vio_port_t;
/**
* @brief Virtual I/O ports static initializer.
* @details An instance of this structure must be passed to @p palInit() at
* system startup time in order to initialized the digital I/O
* subsystem. This represents only the initial setup, specific pads
* or whole ports can be reprogrammed at later time.
*/
typedef struct {
/**
* @brief Virtual port 1 setup data.
*/
sim_vio_port_t VP1Data;
/**
* @brief Virtual port 2 setup data.
*/
sim_vio_port_t VP2Data;
} PALConfig;
/**
* @brief Width, in bits, of an I/O port.
*/
#define PAL_IOPORTS_WIDTH 32
/**
* @brief Whole port mask.
* @brief This macro specifies all the valid bits into a port.
*/
#define PAL_WHOLE_PORT ((ioportmask_t)0xFFFFFFFF)
/**
* @brief Digital I/O port sized unsigned type.
*/
typedef uint32_t ioportmask_t;
/**
* @brief Digital I/O modes.
*/
typedef uint32_t iomode_t;
/**
* @brief Port Identifier.
*/
typedef sim_vio_port_t *ioportid_t;
/*===========================================================================*/
/* I/O Ports Identifiers. */
/*===========================================================================*/
/**
* @brief VIO port 1 identifier.
*/
#define IOPORT1 (&vio_port_1)
/**
* @brief VIO port 2 identifier.
*/
#define IOPORT2 (&vio_port_2)
/*===========================================================================*/
/* Implementation, some of the following macros could be implemented as */
/* functions, if so please put them in pal_lld.c. */
/*===========================================================================*/
/**
* @brief Low level PAL subsystem initialization.
*
* @param[in] config architecture-dependent ports configuration
*
* @notapi
*/
#define pal_lld_init(config) \
(vio_port_1 = (config)->VP1Data, \
vio_port_2 = (config)->VP2Data)
/**
* @brief Reads the physical I/O port states.
*
* @param[in] port port identifier
* @return The port bits.
*
* @notapi
*/
#define pal_lld_readport(port) ((port)->pin)
/**
* @brief Reads the output latch.
* @details The purpose of this function is to read back the latched output
* value.
*
* @param[in] port port identifier
* @return The latched logical states.
*
* @notapi
*/
#define pal_lld_readlatch(port) ((port)->latch)
/**
* @brief Writes a bits mask on a I/O port.
*
* @param[in] port port identifier
* @param[in] bits bits to be written on the specified port
*
* @notapi
*/
#define pal_lld_writeport(port, bits) ((port)->latch = (bits))
/**
* @brief Pads group mode setup.
* @details This function programs a pads group belonging to the same port
* with the specified mode.
*
* @param[in] port port identifier
* @param[in] mask group mask
* @param[in] offset group bit offset within the port
* @param[in] mode group mode
*
* @notapi
*/
#define pal_lld_setgroupmode(port, mask, offset, mode) \
_pal_lld_setgroupmode(port, mask << offset, mode)
#if !defined(__DOXYGEN__)
extern sim_vio_port_t vio_port_1;
extern sim_vio_port_t vio_port_2;
extern const PALConfig pal_default_config;
#endif
#ifdef __cplusplus
extern "C" {
#endif
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
iomode_t mode);
#ifdef __cplusplus
}
#endif
#endif /* HAL_USE_PAL */
#endif /* _PAL_LLD_H_ */
/** @} */