platform.dox
5 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011,2012 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
---
A special exception to the GPL can be applied should you wish to distribute
a combined work that includes ChibiOS/RT, without being obliged to provide
the source code for any proprietary components. See the file exception.txt
for full details of how and when the exception can be applied.
*/
/**
* @defgroup AT91SAM7 AT91SAM7 Drivers
* @details This section describes all the supported drivers on the AT91SAM7
* platform and the implementation details of the single drivers.
*
* @ingroup platforms
*/
/**
* @defgroup AT91SAM7_HAL AT91SAM7 Initialization Support
* @details The AT91SAM7 HAL support is responsible for system initialization.
*
* @section at91sam7_hal_1 Supported HW resources
* - MC.
* - PMC.
* .
* @section at91sam7_hal_2 AT91SAM7 HAL driver implementation features
* - PLLs startup and stabilization.
* - Clock source selection.
* - Flash wait states.
* .
* @ingroup AT91SAM7
*/
/**
* @defgroup AT91SAM7_MAC AT91SAM7 MAC Support
* @details The AT91SAM7 MAC driver supports the EMAC peripheral.
*
* @section at91sam7_mac_1 Supported HW resources
* - EMAC.
* .
* @ingroup AT91SAM7
*/
/**
* @defgroup AT91SAM7_MII AT91SAM7 MII Support
* @details This driver supports the AT91SAM7 EMAC peripheral communicating
* with an external PHY transceiver. The driver currently supports
* the Micrel KS8721 PHY and the Davicom DV9161 modules. This driver
* is used internally by the MAC driver.
*
* @ingroup AT91SAM7
*/
/**
* @defgroup AT91SAM7_PAL AT91SAM7 PAL Support
* @details The AT91SAM7 PAL driver supports the PIO peripherals.
*
* @section at91sam7_pal_1 Supported HW resources
* - PIOA.
* - PIOB.
* .
* @section at91sam7_pal_2 AT91SAM7 PAL driver implementation features
* The PAL driver implementation fully supports the following hardware
* capabilities:
* - 32 bits wide ports.
* - Atomic set/reset functions.
* - Output latched regardless of the pad setting.
* - Direct read of input pads regardless of the pad setting.
* .
* @section at91sam7_pal_3 Supported PAL setup modes
* The AT91SAM7 PAL driver supports the following I/O modes:
* - @p PAL_MODE_RESET.
* - @p PAL_MODE_UNCONNECTED.
* - @p PAL_MODE_INPUT.
* - @p PAL_MODE_INPUT_ANALOG (same as @p PAL_MODE_INPUT).
* - @p PAL_MODE_INPUT_PULLUP.
* - @p PAL_MODE_OUTPUT_PUSHPULL.
* - @p PAL_MODE_OUTPUT_OPENDRAIN.
* .
* Any attempt to setup an invalid mode is ignored.
*
* @section at91sam7_pal_4 Suboptimal behavior
* The AT91SAM7 PIO is less than optimal in several areas, the limitations
* should be taken in account while using the PAL driver:
* - Pad/port toggling operations are not atomic.
* - Pad/group mode setup is not atomic.
* .
* @ingroup AT91SAM7
*/
/**
* @defgroup AT91SAM7_SERIAL AT91SAM7 Serial Support
* @details The AT91SAM7 Serial driver uses the USART/UART peripherals in a
* buffered, interrupt driven, implementation.
*
* @section at91sam7_serial_1 Supported HW resources
* The serial driver can support any of the following hardware resources:
* - USART1.
* - USART2.
* - DBGU.
* .
* @section at91sam7_serial_2 AT91SAM7 Serial driver implementation features
* - Clock stop for reduced power usage when the driver is in stop state.
* - Each USART can be independently enabled and programmed. Unused
* peripherals are left in low power mode.
* - Fully interrupt driven.
* - Programmable priority levels for each USART.
* .
* @ingroup AT91SAM7
*/
/**
* @defgroup AT91SAM7_SPI AT91SAM7 SPI Support
* @details The SPI driver supports the AT91SAM7 SPI peripherals using DMA
* channels for maximum performance.
*
* @section at91sam7_spi_1 Supported HW resources
* - SPI1.
* - SPI2.
* .
* @section at91sam7_spi_2 AT91SAM7 SPI driver implementation features
* - Clock stop for reduced power usage when the driver is in stop state.
* - Each SPI can be independently enabled and programmed. Unused
* peripherals are left in low power mode.
* - Programmable interrupt priority levels for each SPI.
* - DMA is used for receiving and transmitting.
* .
* @ingroup AT91SAM7
*/