pal_lld.c
6.73 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011,2012 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
---
A special exception to the GPL can be applied should you wish to distribute
a combined work that includes ChibiOS/RT, without being obliged to provide
the source code for any proprietary components. See the file exception.txt
for full details of how and when the exception can be applied.
*/
/**
* @file STM32/GPIOv1/pal_lld.c
* @brief STM32F1xx GPIO low level driver code.
*
* @addtogroup PAL
* @{
*/
#include "ch.h"
#include "hal.h"
#if HAL_USE_PAL || defined(__DOXYGEN__)
#if STM32_HAS_GPIOG
#define APB2_EN_MASK (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | \
RCC_APB2ENR_IOPCEN | RCC_APB2ENR_IOPDEN | \
RCC_APB2ENR_IOPEEN | RCC_APB2ENR_IOPFEN | \
RCC_APB2ENR_IOPGEN | RCC_APB2ENR_AFIOEN)
#elif STM32_HAS_GPIOE
#define APB2_EN_MASK (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | \
RCC_APB2ENR_IOPCEN | RCC_APB2ENR_IOPDEN | \
RCC_APB2ENR_IOPEEN | RCC_APB2ENR_AFIOEN)
#else
#define APB2_EN_MASK (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | \
RCC_APB2ENR_IOPCEN | RCC_APB2ENR_IOPDEN | \
RCC_APB2ENR_AFIOEN)
#endif
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local variables. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief STM32 I/O ports configuration.
* @details Ports A-D(E, F, G) clocks enabled, AFIO clock enabled.
*
* @param[in] config the STM32 ports configuration
*
* @notapi
*/
void _pal_lld_init(const PALConfig *config) {
/*
* Enables the GPIO related clocks.
*/
rccEnableAPB2(APB2_EN_MASK, FALSE);
/*
* Initial GPIO setup.
*/
GPIOA->ODR = config->PAData.odr;
GPIOA->CRH = config->PAData.crh;
GPIOA->CRL = config->PAData.crl;
GPIOB->ODR = config->PBData.odr;
GPIOB->CRH = config->PBData.crh;
GPIOB->CRL = config->PBData.crl;
GPIOC->ODR = config->PCData.odr;
GPIOC->CRH = config->PCData.crh;
GPIOC->CRL = config->PCData.crl;
GPIOD->ODR = config->PDData.odr;
GPIOD->CRH = config->PDData.crh;
GPIOD->CRL = config->PDData.crl;
#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
GPIOE->ODR = config->PEData.odr;
GPIOE->CRH = config->PEData.crh;
GPIOE->CRL = config->PEData.crl;
#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
GPIOF->ODR = config->PFData.odr;
GPIOF->CRH = config->PFData.crh;
GPIOF->CRL = config->PFData.crl;
#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
GPIOG->ODR = config->PGData.odr;
GPIOG->CRH = config->PGData.crh;
GPIOG->CRL = config->PGData.crl;
#endif
#endif
#endif
}
/**
* @brief Pads mode setup.
* @details This function programs a pads group belonging to the same port
* with the specified mode.
* @note @p PAL_MODE_UNCONNECTED is implemented as push pull output at 2MHz.
* @note Writing on pads programmed as pull-up or pull-down has the side
* effect to modify the resistor setting because the output latched
* data is used for the resistor selection.
*
* @param[in] port the port identifier
* @param[in] mask the group mask
* @param[in] mode the mode
*
* @notapi
*/
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
iomode_t mode) {
static const uint8_t cfgtab[] = {
4, /* PAL_MODE_RESET, implemented as input.*/
2, /* PAL_MODE_UNCONNECTED, implemented as push pull output 2MHz.*/
4, /* PAL_MODE_INPUT */
8, /* PAL_MODE_INPUT_PULLUP */
8, /* PAL_MODE_INPUT_PULLDOWN */
0, /* PAL_MODE_INPUT_ANALOG */
3, /* PAL_MODE_OUTPUT_PUSHPULL, 50MHz.*/
7, /* PAL_MODE_OUTPUT_OPENDRAIN, 50MHz.*/
8, /* Reserved.*/
8, /* Reserved.*/
8, /* Reserved.*/
8, /* Reserved.*/
8, /* Reserved.*/
8, /* Reserved.*/
8, /* Reserved.*/
8, /* Reserved.*/
0xB, /* PAL_MODE_STM32_ALTERNATE_PUSHPULL, 50MHz.*/
0xF, /* PAL_MODE_STM32_ALTERNATE_OPENDRAIN, 50MHz.*/
};
uint32_t mh, ml, crh, crl, cfg;
unsigned i;
if (mode == PAL_MODE_INPUT_PULLUP)
port->BSRR = mask;
else if (mode == PAL_MODE_INPUT_PULLDOWN)
port->BRR = mask;
cfg = cfgtab[mode];
mh = ml = crh = crl = 0;
for (i = 0; i < 8; i++) {
ml <<= 4;
mh <<= 4;
crl <<= 4;
crh <<= 4;
if ((mask & 0x0080) == 0)
ml |= 0xf;
else
crl |= cfg;
if ((mask & 0x8000) == 0)
mh |= 0xf;
else
crh |= cfg;
mask <<= 1;
}
port->CRH = (port->CRH & mh) | crh;
port->CRL = (port->CRL & ml) | crl;
}
#endif /* HAL_USE_PAL */
/** @} */