serial_lld.h
7.57 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011,2012 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
---
A special exception to the GPL can be applied should you wish to distribute
a combined work that includes ChibiOS/RT, without being obliged to provide
the source code for any proprietary components. See the file exception.txt
for full details of how and when the exception can be applied.
*/
/**
* @file LPC11xx/serial_lld.h
* @brief LPC11xx low level serial driver header.
*
* @addtogroup SERIAL
* @{
*/
#ifndef _SERIAL_LLD_H_
#define _SERIAL_LLD_H_
#if HAL_USE_SERIAL || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver constants. */
/*===========================================================================*/
#define IIR_SRC_MASK 0x0F
#define IIR_SRC_NONE 0x01
#define IIR_SRC_MODEM 0x00
#define IIR_SRC_TX 0x02
#define IIR_SRC_RX 0x04
#define IIR_SRC_ERROR 0x06
#define IIR_SRC_TIMEOUT 0x0C
#define IER_RBR 1
#define IER_THRE 2
#define IER_STATUS 4
#define LCR_WL5 0
#define LCR_WL6 1
#define LCR_WL7 2
#define LCR_WL8 3
#define LCR_STOP1 0
#define LCR_STOP2 4
#define LCR_NOPARITY 0
#define LCR_PARITYODD 0x08
#define LCR_PARITYEVEN 0x18
#define LCR_PARITYONE 0x28
#define LCR_PARITYZERO 0x38
#define LCR_BREAK_ON 0x40
#define LCR_DLAB 0x80
#define FCR_ENABLE 1
#define FCR_RXRESET 2
#define FCR_TXRESET 4
#define FCR_TRIGGER0 0
#define FCR_TRIGGER1 0x40
#define FCR_TRIGGER2 0x80
#define FCR_TRIGGER3 0xC0
#define LSR_RBR_FULL 1
#define LSR_OVERRUN 2
#define LSR_PARITY 4
#define LSR_FRAMING 8
#define LSR_BREAK 0x10
#define LSR_THRE 0x20
#define LSR_TEMT 0x40
#define LSR_RXFE 0x80
#define TER_ENABLE 0x80
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/
/**
* @brief UART0 driver enable switch.
* @details If set to @p TRUE the support for UART0 is included.
* @note The default is @p TRUE .
*/
#if !defined(LPC11xx_SERIAL_USE_UART0) || defined(__DOXYGEN__)
#define LPC11xx_SERIAL_USE_UART0 TRUE
#endif
/**
* @brief FIFO preload parameter.
* @details Configuration parameter, this values defines how many bytes are
* preloaded in the HW transmit FIFO for each interrupt, the maximum
* value is 16 the minimum is 1.
* @note An high value reduces the number of interrupts generated but can
* also increase the worst case interrupt response time because the
* preload loops.
*/
#if !defined(LPC11xx_SERIAL_FIFO_PRELOAD) || defined(__DOXYGEN__)
#define LPC11xx_SERIAL_FIFO_PRELOAD 16
#endif
/**
* @brief UART0 PCLK divider.
*/
#if !defined(LPC11xx_SERIAL_UART0CLKDIV) || defined(__DOXYGEN__)
#define LPC11xx_SERIAL_UART0CLKDIV 1
#endif
/**
* @brief UART0 interrupt priority level setting.
*/
#if !defined(LPC11xx_SERIAL_UART0_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define LPC11xx_SERIAL_UART0_IRQ_PRIORITY 3
#endif
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
#if (LPC11xx_SERIAL_UART0CLKDIV < 1) || (LPC11xx_SERIAL_UART0CLKDIV > 255)
#error "invalid LPC11xx_SERIAL_UART0CLKDIV setting"
#endif
#if (LPC11xx_SERIAL_FIFO_PRELOAD < 1) || (LPC11xx_SERIAL_FIFO_PRELOAD > 16)
#error "invalid LPC11xx_SERIAL_FIFO_PRELOAD setting"
#endif
/**
* @brief UART0 clock.
*/
#define LPC11xx_SERIAL_UART0_PCLK \
(LPC11xx_MAINCLK / LPC11xx_SERIAL_UART0CLKDIV)
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
/**
* @brief LPC11xx Serial Driver configuration structure.
* @details An instance of this structure must be passed to @p sdStart()
* in order to configure and start a serial driver operations.
*/
typedef struct {
/**
* @brief Bit rate.
*/
uint32_t sc_speed;
/**
* @brief Initialization value for the LCR register.
*/
uint32_t sc_lcr;
/**
* @brief Initialization value for the FCR register.
*/
uint32_t sc_fcr;
} SerialConfig;
/**
* @brief @p SerialDriver specific data.
*/
#define _serial_driver_data \
_base_asynchronous_channel_data \
/* Driver state.*/ \
sdstate_t state; \
/* Input queue.*/ \
InputQueue iqueue; \
/* Output queue.*/ \
OutputQueue oqueue; \
/* Input circular buffer.*/ \
uint8_t ib[SERIAL_BUFFERS_SIZE]; \
/* Output circular buffer.*/ \
uint8_t ob[SERIAL_BUFFERS_SIZE]; \
/* End of the mandatory fields.*/ \
/* Pointer to the USART registers block.*/ \
LPC_UART_TypeDef *uart;
/*===========================================================================*/
/* Driver macros. */
/*===========================================================================*/
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
#if LPC11xx_SERIAL_USE_UART0 && !defined(__DOXYGEN__)
extern SerialDriver SD1;
#endif
#ifdef __cplusplus
extern "C" {
#endif
void sd_lld_init(void);
void sd_lld_start(SerialDriver *sdp, const SerialConfig *config);
void sd_lld_stop(SerialDriver *sdp);
#ifdef __cplusplus
}
#endif
#endif /* HAL_USE_SERIAL */
#endif /* _SERIAL_LLD_H_ */
/** @} */