stm32f10x_flash.c 61.1 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684
/**
  ******************************************************************************
  * @file    stm32f10x_flash.c
  * @author  MCD Application Team
  * @version V3.5.0
  * @date    11-March-2011
  * @brief   This file provides all the FLASH firmware functions.
  ******************************************************************************
  * @attention
  *
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  *
  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
  ******************************************************************************
  */

/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_flash.h"

/** @addtogroup STM32F10x_StdPeriph_Driver
  * @{
  */

/** @defgroup FLASH 
  * @brief FLASH driver modules
  * @{
  */ 

/** @defgroup FLASH_Private_TypesDefinitions
  * @{
  */

/**
  * @}
  */ 

/** @defgroup FLASH_Private_Defines
  * @{
  */ 

/* Flash Access Control Register bits */
#define ACR_LATENCY_Mask         ((uint32_t)0x00000038)
#define ACR_HLFCYA_Mask          ((uint32_t)0xFFFFFFF7)
#define ACR_PRFTBE_Mask          ((uint32_t)0xFFFFFFEF)

/* Flash Access Control Register bits */
#define ACR_PRFTBS_Mask          ((uint32_t)0x00000020) 

/* Flash Control Register bits */
#define CR_PG_Set                ((uint32_t)0x00000001)
#define CR_PG_Reset              ((uint32_t)0x00001FFE) 
#define CR_PER_Set               ((uint32_t)0x00000002)
#define CR_PER_Reset             ((uint32_t)0x00001FFD)
#define CR_MER_Set               ((uint32_t)0x00000004)
#define CR_MER_Reset             ((uint32_t)0x00001FFB)
#define CR_OPTPG_Set             ((uint32_t)0x00000010)
#define CR_OPTPG_Reset           ((uint32_t)0x00001FEF)
#define CR_OPTER_Set             ((uint32_t)0x00000020)
#define CR_OPTER_Reset           ((uint32_t)0x00001FDF)
#define CR_STRT_Set              ((uint32_t)0x00000040)
#define CR_LOCK_Set              ((uint32_t)0x00000080)

/* FLASH Mask */
#define RDPRT_Mask               ((uint32_t)0x00000002)
#define WRP0_Mask                ((uint32_t)0x000000FF)
#define WRP1_Mask                ((uint32_t)0x0000FF00)
#define WRP2_Mask                ((uint32_t)0x00FF0000)
#define WRP3_Mask                ((uint32_t)0xFF000000)
#define OB_USER_BFB2             ((uint16_t)0x0008)

/* FLASH Keys */
#define RDP_Key                  ((uint16_t)0x00A5)
#define FLASH_KEY1               ((uint32_t)0x45670123)
#define FLASH_KEY2               ((uint32_t)0xCDEF89AB)

/* FLASH BANK address */
#define FLASH_BANK1_END_ADDRESS   ((uint32_t)0x807FFFF)

/* Delay definition */   
#define EraseTimeout          ((uint32_t)0x000B0000)
#define ProgramTimeout        ((uint32_t)0x00002000)
/**
  * @}
  */ 

/** @defgroup FLASH_Private_Macros
  * @{
  */

/**
  * @}
  */ 

/** @defgroup FLASH_Private_Variables
  * @{
  */

/**
  * @}
  */ 

/** @defgroup FLASH_Private_FunctionPrototypes
  * @{
  */
  
/**
  * @}
  */

/** @defgroup FLASH_Private_Functions
  * @{
  */

/**
@code  
 
 This driver provides functions to configure and program the Flash memory of all STM32F10x devices,
 including the latest STM32F10x_XL density devices. 

 STM32F10x_XL devices feature up to 1 Mbyte with dual bank architecture for read-while-write (RWW) capability:
    - bank1: fixed size of 512 Kbytes (256 pages of 2Kbytes each)
    - bank2: up to 512 Kbytes (up to 256 pages of 2Kbytes each)
 While other STM32F10x devices features only one bank with memory up to 512 Kbytes.

 In version V3.3.0, some functions were updated and new ones were added to support
 STM32F10x_XL devices. Thus some functions manages all devices, while other are 
 dedicated for XL devices only.
 
 The table below presents the list of available functions depending on the used STM32F10x devices.  
      
   ***************************************************
   * Legacy functions used for all STM32F10x devices *
   ***************************************************
   +----------------------------------------------------------------------------------------------------------------------------------+
   |       Functions prototypes         |STM32F10x_XL|Other STM32F10x|    Comments                                                    |
   |                                    |   devices  |  devices      |                                                                |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_SetLatency                    |    Yes     |      Yes      | No change                                                      |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_HalfCycleAccessCmd            |    Yes     |      Yes      | No change                                                      |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_PrefetchBufferCmd             |    Yes     |      Yes      | No change                                                      |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_Unlock                        |    Yes     |      Yes      | - For STM32F10X_XL devices: unlock Bank1 and Bank2.            |
   |                                    |            |               | - For other devices: unlock Bank1 and it is equivalent         |
   |                                    |            |               |   to FLASH_UnlockBank1 function.                               |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_Lock                          |    Yes     |      Yes      | - For STM32F10X_XL devices: lock Bank1 and Bank2.              |
   |                                    |            |               | - For other devices: lock Bank1 and it is equivalent           |
   |                                    |            |               |   to FLASH_LockBank1 function.                                 |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_ErasePage                     |    Yes     |      Yes      | - For STM32F10x_XL devices: erase a page in Bank1 and Bank2    |
   |                                    |            |               | - For other devices: erase a page in Bank1                     |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_EraseAllPages                 |    Yes     |      Yes      | - For STM32F10x_XL devices: erase all pages in Bank1 and Bank2 |
   |                                    |            |               | - For other devices: erase all pages in Bank1                  |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_EraseOptionBytes              |    Yes     |      Yes      | No change                                                      |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_ProgramWord                   |    Yes     |      Yes      | Updated to program up to 1MByte (depending on the used device) |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_ProgramHalfWord               |    Yes     |      Yes      | Updated to program up to 1MByte (depending on the used device) |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_ProgramOptionByteData         |    Yes     |      Yes      | No change                                                      |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_EnableWriteProtection         |    Yes     |      Yes      | No change                                                      |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_ReadOutProtection             |    Yes     |      Yes      | No change                                                      |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_UserOptionByteConfig          |    Yes     |      Yes      | No change                                                      |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_GetUserOptionByte             |    Yes     |      Yes      | No change                                                      |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_GetWriteProtectionOptionByte  |    Yes     |      Yes      | No change                                                      |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_GetReadOutProtectionStatus    |    Yes     |      Yes      | No change                                                      |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_GetPrefetchBufferStatus       |    Yes     |      Yes      | No change                                                      |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_ITConfig                      |    Yes     |      Yes      | - For STM32F10x_XL devices: enable Bank1 and Bank2's interrupts|
   |                                    |            |               | - For other devices: enable Bank1's interrupts                 |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_GetFlagStatus                 |    Yes     |      Yes      | - For STM32F10x_XL devices: return Bank1 and Bank2's flag status|
   |                                    |            |               | - For other devices: return Bank1's flag status                |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_ClearFlag                     |    Yes     |      Yes      | - For STM32F10x_XL devices: clear Bank1 and Bank2's flag       |
   |                                    |            |               | - For other devices: clear Bank1's flag                        |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_GetStatus                     |    Yes     |      Yes      | - Return the status of Bank1 (for all devices)                 |
   |                                    |            |               |   equivalent to FLASH_GetBank1Status function                  |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_WaitForLastOperation          |    Yes     |      Yes      | - Wait for Bank1 last operation (for all devices)              |
   |                                    |            |               |   equivalent to: FLASH_WaitForLastBank1Operation function      |
   +----------------------------------------------------------------------------------------------------------------------------------+

   ************************************************************************************************************************
   * New functions used for all STM32F10x devices to manage Bank1:                                                        *
   *   - These functions are mainly useful for STM32F10x_XL density devices, to have separate control for Bank1 and bank2 *
   *   - For other devices, these functions are optional (covered by functions listed above)                              *
   ************************************************************************************************************************
   +----------------------------------------------------------------------------------------------------------------------------------+
   |       Functions prototypes         |STM32F10x_XL|Other STM32F10x|    Comments                                                    |
   |                                    |   devices  |  devices      |                                                                |
   |----------------------------------------------------------------------------------------------------------------------------------|
   | FLASH_UnlockBank1                  |    Yes     |      Yes      | - Unlock Bank1                                                 |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_LockBank1                     |    Yes     |      Yes      | - Lock Bank1                                                   |
   |----------------------------------------------------------------------------------------------------------------------------------|
   | FLASH_EraseAllBank1Pages           |    Yes     |      Yes      | - Erase all pages in Bank1                                     |
   |----------------------------------------------------------------------------------------------------------------------------------|
   | FLASH_GetBank1Status               |    Yes     |      Yes      | - Return the status of Bank1                                   |
   |----------------------------------------------------------------------------------------------------------------------------------|
   | FLASH_WaitForLastBank1Operation    |    Yes     |      Yes      | - Wait for Bank1 last operation                                |
   +----------------------------------------------------------------------------------------------------------------------------------+

   *****************************************************************************
   * New Functions used only with STM32F10x_XL density devices to manage Bank2 *
   *****************************************************************************
   +----------------------------------------------------------------------------------------------------------------------------------+
   |       Functions prototypes         |STM32F10x_XL|Other STM32F10x|    Comments                                                    |
   |                                    |   devices  |  devices      |                                                                |
   |----------------------------------------------------------------------------------------------------------------------------------|
   | FLASH_UnlockBank2                  |    Yes     |      No       | - Unlock Bank2                                                 |
   |----------------------------------------------------------------------------------------------------------------------------------|
   |FLASH_LockBank2                     |    Yes     |      No       | - Lock Bank2                                                   |
   |----------------------------------------------------------------------------------------------------------------------------------|
   | FLASH_EraseAllBank2Pages           |    Yes     |      No       | - Erase all pages in Bank2                                     |
   |----------------------------------------------------------------------------------------------------------------------------------|
   | FLASH_GetBank2Status               |    Yes     |      No       | - Return the status of Bank2                                   |
   |----------------------------------------------------------------------------------------------------------------------------------|
   | FLASH_WaitForLastBank2Operation    |    Yes     |      No       | - Wait for Bank2 last operation                                |
   |----------------------------------------------------------------------------------------------------------------------------------|
   | FLASH_BootConfig                   |    Yes     |      No       | - Configure to boot from Bank1 or Bank2                        |
   +----------------------------------------------------------------------------------------------------------------------------------+
@endcode
*/


/**
  * @brief  Sets the code latency value.
  * @note   This function can be used for all STM32F10x devices.
  * @param  FLASH_Latency: specifies the FLASH Latency value.
  *   This parameter can be one of the following values:
  *     @arg FLASH_Latency_0: FLASH Zero Latency cycle
  *     @arg FLASH_Latency_1: FLASH One Latency cycle
  *     @arg FLASH_Latency_2: FLASH Two Latency cycles
  * @retval None
  */
void FLASH_SetLatency(uint32_t FLASH_Latency)
{
  uint32_t tmpreg = 0;
  
  /* Check the parameters */
  assert_param(IS_FLASH_LATENCY(FLASH_Latency));
  
  /* Read the ACR register */
  tmpreg = FLASH->ACR;  
  
  /* Sets the Latency value */
  tmpreg &= ACR_LATENCY_Mask;
  tmpreg |= FLASH_Latency;
  
  /* Write the ACR register */
  FLASH->ACR = tmpreg;
}

/**
  * @brief  Enables or disables the Half cycle flash access.
  * @note   This function can be used for all STM32F10x devices.
  * @param  FLASH_HalfCycleAccess: specifies the FLASH Half cycle Access mode.
  *   This parameter can be one of the following values:
  *     @arg FLASH_HalfCycleAccess_Enable: FLASH Half Cycle Enable
  *     @arg FLASH_HalfCycleAccess_Disable: FLASH Half Cycle Disable
  * @retval None
  */
void FLASH_HalfCycleAccessCmd(uint32_t FLASH_HalfCycleAccess)
{
  /* Check the parameters */
  assert_param(IS_FLASH_HALFCYCLEACCESS_STATE(FLASH_HalfCycleAccess));
  
  /* Enable or disable the Half cycle access */
  FLASH->ACR &= ACR_HLFCYA_Mask;
  FLASH->ACR |= FLASH_HalfCycleAccess;
}

/**
  * @brief  Enables or disables the Prefetch Buffer.
  * @note   This function can be used for all STM32F10x devices.
  * @param  FLASH_PrefetchBuffer: specifies the Prefetch buffer status.
  *   This parameter can be one of the following values:
  *     @arg FLASH_PrefetchBuffer_Enable: FLASH Prefetch Buffer Enable
  *     @arg FLASH_PrefetchBuffer_Disable: FLASH Prefetch Buffer Disable
  * @retval None
  */
void FLASH_PrefetchBufferCmd(uint32_t FLASH_PrefetchBuffer)
{
  /* Check the parameters */
  assert_param(IS_FLASH_PREFETCHBUFFER_STATE(FLASH_PrefetchBuffer));
  
  /* Enable or disable the Prefetch Buffer */
  FLASH->ACR &= ACR_PRFTBE_Mask;
  FLASH->ACR |= FLASH_PrefetchBuffer;
}

/**
  * @brief  Unlocks the FLASH Program Erase Controller.
  * @note   This function can be used for all STM32F10x devices.
  *         - For STM32F10X_XL devices this function unlocks Bank1 and Bank2.
  *         - For all other devices it unlocks Bank1 and it is equivalent 
  *           to FLASH_UnlockBank1 function.. 
  * @param  None
  * @retval None
  */
void FLASH_Unlock(void)
{
  /* Authorize the FPEC of Bank1 Access */
  FLASH->KEYR = FLASH_KEY1;
  FLASH->KEYR = FLASH_KEY2;

#ifdef STM32F10X_XL
  /* Authorize the FPEC of Bank2 Access */
  FLASH->KEYR2 = FLASH_KEY1;
  FLASH->KEYR2 = FLASH_KEY2;
#endif /* STM32F10X_XL */
}
/**
  * @brief  Unlocks the FLASH Bank1 Program Erase Controller.
  * @note   This function can be used for all STM32F10x devices.
  *         - For STM32F10X_XL devices this function unlocks Bank1.
  *         - For all other devices it unlocks Bank1 and it is 
  *           equivalent to FLASH_Unlock function.
  * @param  None
  * @retval None
  */
void FLASH_UnlockBank1(void)
{
  /* Authorize the FPEC of Bank1 Access */
  FLASH->KEYR = FLASH_KEY1;
  FLASH->KEYR = FLASH_KEY2;
}

#ifdef STM32F10X_XL
/**
  * @brief  Unlocks the FLASH Bank2 Program Erase Controller.
  * @note   This function can be used only for STM32F10X_XL density devices.
  * @param  None
  * @retval None
  */
void FLASH_UnlockBank2(void)
{
  /* Authorize the FPEC of Bank2 Access */
  FLASH->KEYR2 = FLASH_KEY1;
  FLASH->KEYR2 = FLASH_KEY2;

}
#endif /* STM32F10X_XL */

/**
  * @brief  Locks the FLASH Program Erase Controller.
  * @note   This function can be used for all STM32F10x devices.
  *         - For STM32F10X_XL devices this function Locks Bank1 and Bank2.
  *         - For all other devices it Locks Bank1 and it is equivalent 
  *           to FLASH_LockBank1 function.
  * @param  None
  * @retval None
  */
void FLASH_Lock(void)
{
  /* Set the Lock Bit to lock the FPEC and the CR of  Bank1 */
  FLASH->CR |= CR_LOCK_Set;

#ifdef STM32F10X_XL
  /* Set the Lock Bit to lock the FPEC and the CR of  Bank2 */
  FLASH->CR2 |= CR_LOCK_Set;
#endif /* STM32F10X_XL */
}

/**
  * @brief  Locks the FLASH Bank1 Program Erase Controller.
  * @note   this function can be used for all STM32F10x devices.
  *         - For STM32F10X_XL devices this function Locks Bank1.
  *         - For all other devices it Locks Bank1 and it is equivalent 
  *           to FLASH_Lock function.
  * @param  None
  * @retval None
  */
void FLASH_LockBank1(void)
{
  /* Set the Lock Bit to lock the FPEC and the CR of  Bank1 */
  FLASH->CR |= CR_LOCK_Set;
}

#ifdef STM32F10X_XL
/**
  * @brief  Locks the FLASH Bank2 Program Erase Controller.
  * @note   This function can be used only for STM32F10X_XL density devices.
  * @param  None
  * @retval None
  */
void FLASH_LockBank2(void)
{
  /* Set the Lock Bit to lock the FPEC and the CR of  Bank2 */
  FLASH->CR2 |= CR_LOCK_Set;
}
#endif /* STM32F10X_XL */

/**
  * @brief  Erases a specified FLASH page.
  * @note   This function can be used for all STM32F10x devices.
  * @param  Page_Address: The page address to be erased.
  * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
  */
FLASH_Status FLASH_ErasePage(uint32_t Page_Address)
{
  FLASH_Status status = FLASH_COMPLETE;
  /* Check the parameters */
  assert_param(IS_FLASH_ADDRESS(Page_Address));

#ifdef STM32F10X_XL
  if(Page_Address < FLASH_BANK1_END_ADDRESS)  
  {
    /* Wait for last operation to be completed */
    status = FLASH_WaitForLastBank1Operation(EraseTimeout);
    if(status == FLASH_COMPLETE)
    { 
      /* if the previous operation is completed, proceed to erase the page */
      FLASH->CR|= CR_PER_Set;
      FLASH->AR = Page_Address; 
      FLASH->CR|= CR_STRT_Set;
    
      /* Wait for last operation to be completed */
      status = FLASH_WaitForLastBank1Operation(EraseTimeout);

      /* Disable the PER Bit */
      FLASH->CR &= CR_PER_Reset;
    }
  }
  else
  {
    /* Wait for last operation to be completed */
    status = FLASH_WaitForLastBank2Operation(EraseTimeout);
    if(status == FLASH_COMPLETE)
    { 
      /* if the previous operation is completed, proceed to erase the page */
      FLASH->CR2|= CR_PER_Set;
      FLASH->AR2 = Page_Address; 
      FLASH->CR2|= CR_STRT_Set;
    
      /* Wait for last operation to be completed */
      status = FLASH_WaitForLastBank2Operation(EraseTimeout);
      
      /* Disable the PER Bit */
      FLASH->CR2 &= CR_PER_Reset;
    }
  }
#else
  /* Wait for last operation to be completed */
  status = FLASH_WaitForLastOperation(EraseTimeout);
  
  if(status == FLASH_COMPLETE)
  { 
    /* if the previous operation is completed, proceed to erase the page */
    FLASH->CR|= CR_PER_Set;
    FLASH->AR = Page_Address; 
    FLASH->CR|= CR_STRT_Set;
    
    /* Wait for last operation to be completed */
    status = FLASH_WaitForLastOperation(EraseTimeout);
    
    /* Disable the PER Bit */
    FLASH->CR &= CR_PER_Reset;
  }
#endif /* STM32F10X_XL */

  /* Return the Erase Status */
  return status;
}

/**
  * @brief  Erases all FLASH pages.
  * @note   This function can be used for all STM32F10x devices.
  * @param  None
  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
  */
FLASH_Status FLASH_EraseAllPages(void)
{
  FLASH_Status status = FLASH_COMPLETE;

#ifdef STM32F10X_XL
  /* Wait for last operation to be completed */
  status = FLASH_WaitForLastBank1Operation(EraseTimeout);
  
  if(status == FLASH_COMPLETE)
  {
    /* if the previous operation is completed, proceed to erase all pages */
     FLASH->CR |= CR_MER_Set;
     FLASH->CR |= CR_STRT_Set;
    
    /* Wait for last operation to be completed */
    status = FLASH_WaitForLastBank1Operation(EraseTimeout);
    
    /* Disable the MER Bit */
    FLASH->CR &= CR_MER_Reset;
  }    
  if(status == FLASH_COMPLETE)
  {
    /* if the previous operation is completed, proceed to erase all pages */
     FLASH->CR2 |= CR_MER_Set;
     FLASH->CR2 |= CR_STRT_Set;
    
    /* Wait for last operation to be completed */
    status = FLASH_WaitForLastBank2Operation(EraseTimeout);
    
    /* Disable the MER Bit */
    FLASH->CR2 &= CR_MER_Reset;
  }
#else
  /* Wait for last operation to be completed */
  status = FLASH_WaitForLastOperation(EraseTimeout);
  if(status == FLASH_COMPLETE)
  {
    /* if the previous operation is completed, proceed to erase all pages */
     FLASH->CR |= CR_MER_Set;
     FLASH->CR |= CR_STRT_Set;
    
    /* Wait for last operation to be completed */
    status = FLASH_WaitForLastOperation(EraseTimeout);

    /* Disable the MER Bit */
    FLASH->CR &= CR_MER_Reset;
  }
#endif /* STM32F10X_XL */

  /* Return the Erase Status */
  return status;
}

/**
  * @brief  Erases all Bank1 FLASH pages.
  * @note   This function can be used for all STM32F10x devices.
  *         - For STM32F10X_XL devices this function erases all Bank1 pages.
  *         - For all other devices it erases all Bank1 pages and it is equivalent 
  *           to FLASH_EraseAllPages function.
  * @param  None
  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
  */
FLASH_Status FLASH_EraseAllBank1Pages(void)
{
  FLASH_Status status = FLASH_COMPLETE;
  /* Wait for last operation to be completed */
  status = FLASH_WaitForLastBank1Operation(EraseTimeout);
  
  if(status == FLASH_COMPLETE)
  {
    /* if the previous operation is completed, proceed to erase all pages */
     FLASH->CR |= CR_MER_Set;
     FLASH->CR |= CR_STRT_Set;
    
    /* Wait for last operation to be completed */
    status = FLASH_WaitForLastBank1Operation(EraseTimeout);
    
    /* Disable the MER Bit */
    FLASH->CR &= CR_MER_Reset;
  }    
  /* Return the Erase Status */
  return status;
}

#ifdef STM32F10X_XL
/**
  * @brief  Erases all Bank2 FLASH pages.
  * @note   This function can be used only for STM32F10x_XL density devices.
  * @param  None
  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
  */
FLASH_Status FLASH_EraseAllBank2Pages(void)
{
  FLASH_Status status = FLASH_COMPLETE;
  /* Wait for last operation to be completed */
  status = FLASH_WaitForLastBank2Operation(EraseTimeout);
  
  if(status == FLASH_COMPLETE)
  {
    /* if the previous operation is completed, proceed to erase all pages */
     FLASH->CR2 |= CR_MER_Set;
     FLASH->CR2 |= CR_STRT_Set;
    
    /* Wait for last operation to be completed */
    status = FLASH_WaitForLastBank2Operation(EraseTimeout);

    /* Disable the MER Bit */
    FLASH->CR2 &= CR_MER_Reset;
  }    
  /* Return the Erase Status */
  return status;
}
#endif /* STM32F10X_XL */

/**
  * @brief  Erases the FLASH option bytes.
  * @note   This functions erases all option bytes except the Read protection (RDP). 
  * @note   This function can be used for all STM32F10x devices.
  * @param  None
  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
  */
FLASH_Status FLASH_EraseOptionBytes(void)
{
  uint16_t rdptmp = RDP_Key;

  FLASH_Status status = FLASH_COMPLETE;

  /* Get the actual read protection Option Byte value */ 
  if(FLASH_GetReadOutProtectionStatus() != RESET)
  {
    rdptmp = 0x00;  
  }

  /* Wait for last operation to be completed */
  status = FLASH_WaitForLastOperation(EraseTimeout);
  if(status == FLASH_COMPLETE)
  {
    /* Authorize the small information block programming */
    FLASH->OPTKEYR = FLASH_KEY1;
    FLASH->OPTKEYR = FLASH_KEY2;
    
    /* if the previous operation is completed, proceed to erase the option bytes */
    FLASH->CR |= CR_OPTER_Set;
    FLASH->CR |= CR_STRT_Set;
    /* Wait for last operation to be completed */
    status = FLASH_WaitForLastOperation(EraseTimeout);
    
    if(status == FLASH_COMPLETE)
    {
      /* if the erase operation is completed, disable the OPTER Bit */
      FLASH->CR &= CR_OPTER_Reset;
       
      /* Enable the Option Bytes Programming operation */
      FLASH->CR |= CR_OPTPG_Set;
      /* Restore the last read protection Option Byte value */
      OB->RDP = (uint16_t)rdptmp; 
      /* Wait for last operation to be completed */
      status = FLASH_WaitForLastOperation(ProgramTimeout);
 
      if(status != FLASH_TIMEOUT)
      {
        /* if the program operation is completed, disable the OPTPG Bit */
        FLASH->CR &= CR_OPTPG_Reset;
      }
    }
    else
    {
      if (status != FLASH_TIMEOUT)
      {
        /* Disable the OPTPG Bit */
        FLASH->CR &= CR_OPTPG_Reset;
      }
    }  
  }
  /* Return the erase status */
  return status;
}

/**
  * @brief  Programs a word at a specified address.
  * @note   This function can be used for all STM32F10x devices.
  * @param  Address: specifies the address to be programmed.
  * @param  Data: specifies the data to be programmed.
  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. 
  */
FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data)
{
  FLASH_Status status = FLASH_COMPLETE;
  __IO uint32_t tmp = 0;

  /* Check the parameters */
  assert_param(IS_FLASH_ADDRESS(Address));

#ifdef STM32F10X_XL
  if(Address < FLASH_BANK1_END_ADDRESS - 2)
  { 
    /* Wait for last operation to be completed */
    status = FLASH_WaitForLastBank1Operation(ProgramTimeout); 
    if(status == FLASH_COMPLETE)
    {
      /* if the previous operation is completed, proceed to program the new first 
        half word */
      FLASH->CR |= CR_PG_Set;
  
      *(__IO uint16_t*)Address = (uint16_t)Data;
      /* Wait for last operation to be completed */
      status = FLASH_WaitForLastOperation(ProgramTimeout);
 
      if(status == FLASH_COMPLETE)
      {
        /* if the previous operation is completed, proceed to program the new second 
        half word */
        tmp = Address + 2;

        *(__IO uint16_t*) tmp = Data >> 16;
    
        /* Wait for last operation to be completed */
        status = FLASH_WaitForLastOperation(ProgramTimeout);
        
        /* Disable the PG Bit */
        FLASH->CR &= CR_PG_Reset;
      }
      else
      {
        /* Disable the PG Bit */
        FLASH->CR &= CR_PG_Reset;
       }
    }
  }
  else if(Address == (FLASH_BANK1_END_ADDRESS - 1))
  {
    /* Wait for last operation to be completed */
    status = FLASH_WaitForLastBank1Operation(ProgramTimeout);

    if(status == FLASH_COMPLETE)
    {
      /* if the previous operation is completed, proceed to program the new first 
        half word */
      FLASH->CR |= CR_PG_Set;
  
      *(__IO uint16_t*)Address = (uint16_t)Data;

      /* Wait for last operation to be completed */
      status = FLASH_WaitForLastBank1Operation(ProgramTimeout);
      
	  /* Disable the PG Bit */
      FLASH->CR &= CR_PG_Reset;
    }
    else
    {
      /* Disable the PG Bit */
      FLASH->CR &= CR_PG_Reset;
    }

    /* Wait for last operation to be completed */
    status = FLASH_WaitForLastBank2Operation(ProgramTimeout);

    if(status == FLASH_COMPLETE)
    {
      /* if the previous operation is completed, proceed to program the new second 
      half word */
      FLASH->CR2 |= CR_PG_Set;
      tmp = Address + 2;

      *(__IO uint16_t*) tmp = Data >> 16;
    
      /* Wait for last operation to be completed */
      status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
        
      /* Disable the PG Bit */
      FLASH->CR2 &= CR_PG_Reset;
    }
    else
    {
      /* Disable the PG Bit */
      FLASH->CR2 &= CR_PG_Reset;
    }
  }
  else
  {
    /* Wait for last operation to be completed */
    status = FLASH_WaitForLastBank2Operation(ProgramTimeout);

    if(status == FLASH_COMPLETE)
    {
      /* if the previous operation is completed, proceed to program the new first 
        half word */
      FLASH->CR2 |= CR_PG_Set;
  
      *(__IO uint16_t*)Address = (uint16_t)Data;
      /* Wait for last operation to be completed */
      status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
 
      if(status == FLASH_COMPLETE)
      {
        /* if the previous operation is completed, proceed to program the new second 
        half word */
        tmp = Address + 2;

        *(__IO uint16_t*) tmp = Data >> 16;
    
        /* Wait for last operation to be completed */
        status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
        
        /* Disable the PG Bit */
        FLASH->CR2 &= CR_PG_Reset;
      }
      else
      {
        /* Disable the PG Bit */
        FLASH->CR2 &= CR_PG_Reset;
      }
    }
  }
#else
  /* Wait for last operation to be completed */
  status = FLASH_WaitForLastOperation(ProgramTimeout);
  
  if(status == FLASH_COMPLETE)
  {
    /* if the previous operation is completed, proceed to program the new first 
    half word */
    FLASH->CR |= CR_PG_Set;
  
    *(__IO uint16_t*)Address = (uint16_t)Data;
    /* Wait for last operation to be completed */
    status = FLASH_WaitForLastOperation(ProgramTimeout);
 
    if(status == FLASH_COMPLETE)
    {
      /* if the previous operation is completed, proceed to program the new second 
      half word */
      tmp = Address + 2;

      *(__IO uint16_t*) tmp = Data >> 16;
    
      /* Wait for last operation to be completed */
      status = FLASH_WaitForLastOperation(ProgramTimeout);
        
      /* Disable the PG Bit */
      FLASH->CR &= CR_PG_Reset;
    }
    else
    {
      /* Disable the PG Bit */
      FLASH->CR &= CR_PG_Reset;
    }
  }         
#endif /* STM32F10X_XL */
   
  /* Return the Program Status */
  return status;
}

/**
  * @brief  Programs a half word at a specified address.
  * @note   This function can be used for all STM32F10x devices.
  * @param  Address: specifies the address to be programmed.
  * @param  Data: specifies the data to be programmed.
  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. 
  */
FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data)
{
  FLASH_Status status = FLASH_COMPLETE;
  /* Check the parameters */
  assert_param(IS_FLASH_ADDRESS(Address));

#ifdef STM32F10X_XL
  /* Wait for last operation to be completed */
  status = FLASH_WaitForLastOperation(ProgramTimeout);
  
  if(Address < FLASH_BANK1_END_ADDRESS)
  {
    if(status == FLASH_COMPLETE)
    {
      /* if the previous operation is completed, proceed to program the new data */
      FLASH->CR |= CR_PG_Set;
  
      *(__IO uint16_t*)Address = Data;
      /* Wait for last operation to be completed */
      status = FLASH_WaitForLastBank1Operation(ProgramTimeout);

      /* Disable the PG Bit */
      FLASH->CR &= CR_PG_Reset;
    }
  }
  else
  {
    if(status == FLASH_COMPLETE)
    {
      /* if the previous operation is completed, proceed to program the new data */
      FLASH->CR2 |= CR_PG_Set;
  
      *(__IO uint16_t*)Address = Data;
      /* Wait for last operation to be completed */
      status = FLASH_WaitForLastBank2Operation(ProgramTimeout);

      /* Disable the PG Bit */
      FLASH->CR2 &= CR_PG_Reset;
    }
  }
#else
  /* Wait for last operation to be completed */
  status = FLASH_WaitForLastOperation(ProgramTimeout);
  
  if(status == FLASH_COMPLETE)
  {
    /* if the previous operation is completed, proceed to program the new data */
    FLASH->CR |= CR_PG_Set;
  
    *(__IO uint16_t*)Address = Data;
    /* Wait for last operation to be completed */
    status = FLASH_WaitForLastOperation(ProgramTimeout);
    
    /* Disable the PG Bit */
    FLASH->CR &= CR_PG_Reset;
  } 
#endif  /* STM32F10X_XL */
  
  /* Return the Program Status */
  return status;
}

/**
  * @brief  Programs a half word at a specified Option Byte Data address.
  * @note   This function can be used for all STM32F10x devices.
  * @param  Address: specifies the address to be programmed.
  *   This parameter can be 0x1FFFF804 or 0x1FFFF806. 
  * @param  Data: specifies the data to be programmed.
  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. 
  */
FLASH_Status FLASH_ProgramOptionByteData(uint32_t Address, uint8_t Data)
{
  FLASH_Status status = FLASH_COMPLETE;
  /* Check the parameters */
  assert_param(IS_OB_DATA_ADDRESS(Address));
  status = FLASH_WaitForLastOperation(ProgramTimeout);

  if(status == FLASH_COMPLETE)
  {
    /* Authorize the small information block programming */
    FLASH->OPTKEYR = FLASH_KEY1;
    FLASH->OPTKEYR = FLASH_KEY2;
    /* Enables the Option Bytes Programming operation */
    FLASH->CR |= CR_OPTPG_Set; 
    *(__IO uint16_t*)Address = Data;
    
    /* Wait for last operation to be completed */
    status = FLASH_WaitForLastOperation(ProgramTimeout);
    if(status != FLASH_TIMEOUT)
    {
      /* if the program operation is completed, disable the OPTPG Bit */
      FLASH->CR &= CR_OPTPG_Reset;
    }
  }
  /* Return the Option Byte Data Program Status */
  return status;
}

/**
  * @brief  Write protects the desired pages
  * @note   This function can be used for all STM32F10x devices.
  * @param  FLASH_Pages: specifies the address of the pages to be write protected.
  *   This parameter can be:
  *     @arg For @b STM32_Low-density_devices: value between FLASH_WRProt_Pages0to3 and FLASH_WRProt_Pages28to31  
  *     @arg For @b STM32_Medium-density_devices: value between FLASH_WRProt_Pages0to3
  *       and FLASH_WRProt_Pages124to127
  *     @arg For @b STM32_High-density_devices: value between FLASH_WRProt_Pages0to1 and
  *       FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to255
  *     @arg For @b STM32_Connectivity_line_devices: value between FLASH_WRProt_Pages0to1 and
  *       FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to127    
  *     @arg For @b STM32_XL-density_devices: value between FLASH_WRProt_Pages0to1 and
  *       FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to511
  *     @arg FLASH_WRProt_AllPages
  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
  */
FLASH_Status FLASH_EnableWriteProtection(uint32_t FLASH_Pages)
{
  uint16_t WRP0_Data = 0xFFFF, WRP1_Data = 0xFFFF, WRP2_Data = 0xFFFF, WRP3_Data = 0xFFFF;
  
  FLASH_Status status = FLASH_COMPLETE;
  
  /* Check the parameters */
  assert_param(IS_FLASH_WRPROT_PAGE(FLASH_Pages));
  
  FLASH_Pages = (uint32_t)(~FLASH_Pages);
  WRP0_Data = (uint16_t)(FLASH_Pages & WRP0_Mask);
  WRP1_Data = (uint16_t)((FLASH_Pages & WRP1_Mask) >> 8);
  WRP2_Data = (uint16_t)((FLASH_Pages & WRP2_Mask) >> 16);
  WRP3_Data = (uint16_t)((FLASH_Pages & WRP3_Mask) >> 24);
  
  /* Wait for last operation to be completed */
  status = FLASH_WaitForLastOperation(ProgramTimeout);
  
  if(status == FLASH_COMPLETE)
  {
    /* Authorizes the small information block programming */
    FLASH->OPTKEYR = FLASH_KEY1;
    FLASH->OPTKEYR = FLASH_KEY2;
    FLASH->CR |= CR_OPTPG_Set;
    if(WRP0_Data != 0xFF)
    {
      OB->WRP0 = WRP0_Data;
      
      /* Wait for last operation to be completed */
      status = FLASH_WaitForLastOperation(ProgramTimeout);
    }
    if((status == FLASH_COMPLETE) && (WRP1_Data != 0xFF))
    {
      OB->WRP1 = WRP1_Data;
      
      /* Wait for last operation to be completed */
      status = FLASH_WaitForLastOperation(ProgramTimeout);
    }
    if((status == FLASH_COMPLETE) && (WRP2_Data != 0xFF))
    {
      OB->WRP2 = WRP2_Data;
      
      /* Wait for last operation to be completed */
      status = FLASH_WaitForLastOperation(ProgramTimeout);
    }
    
    if((status == FLASH_COMPLETE)&& (WRP3_Data != 0xFF))
    {
      OB->WRP3 = WRP3_Data;
     
      /* Wait for last operation to be completed */
      status = FLASH_WaitForLastOperation(ProgramTimeout);
    }
          
    if(status != FLASH_TIMEOUT)
    {
      /* if the program operation is completed, disable the OPTPG Bit */
      FLASH->CR &= CR_OPTPG_Reset;
    }
  } 
  /* Return the write protection operation Status */
  return status;       
}

/**
  * @brief  Enables or disables the read out protection.
  * @note   If the user has already programmed the other option bytes before calling 
  *   this function, he must re-program them since this function erases all option bytes.
  * @note   This function can be used for all STM32F10x devices.
  * @param  Newstate: new state of the ReadOut Protection.
  *   This parameter can be: ENABLE or DISABLE.
  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
  */
FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState)
{
  FLASH_Status status = FLASH_COMPLETE;
  /* Check the parameters */
  assert_param(IS_FUNCTIONAL_STATE(NewState));
  status = FLASH_WaitForLastOperation(EraseTimeout);
  if(status == FLASH_COMPLETE)
  {
    /* Authorizes the small information block programming */
    FLASH->OPTKEYR = FLASH_KEY1;
    FLASH->OPTKEYR = FLASH_KEY2;
    FLASH->CR |= CR_OPTER_Set;
    FLASH->CR |= CR_STRT_Set;
    /* Wait for last operation to be completed */
    status = FLASH_WaitForLastOperation(EraseTimeout);
    if(status == FLASH_COMPLETE)
    {
      /* if the erase operation is completed, disable the OPTER Bit */
      FLASH->CR &= CR_OPTER_Reset;
      /* Enable the Option Bytes Programming operation */
      FLASH->CR |= CR_OPTPG_Set; 
      if(NewState != DISABLE)
      {
        OB->RDP = 0x00;
      }
      else
      {
        OB->RDP = RDP_Key;  
      }
      /* Wait for last operation to be completed */
      status = FLASH_WaitForLastOperation(EraseTimeout); 
    
      if(status != FLASH_TIMEOUT)
      {
        /* if the program operation is completed, disable the OPTPG Bit */
        FLASH->CR &= CR_OPTPG_Reset;
      }
    }
    else 
    {
      if(status != FLASH_TIMEOUT)
      {
        /* Disable the OPTER Bit */
        FLASH->CR &= CR_OPTER_Reset;
      }
    }
  }
  /* Return the protection operation Status */
  return status;       
}

/**
  * @brief  Programs the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY.
  * @note   This function can be used for all STM32F10x devices.
  * @param  OB_IWDG: Selects the IWDG mode
  *   This parameter can be one of the following values:
  *     @arg OB_IWDG_SW: Software IWDG selected
  *     @arg OB_IWDG_HW: Hardware IWDG selected
  * @param  OB_STOP: Reset event when entering STOP mode.
  *   This parameter can be one of the following values:
  *     @arg OB_STOP_NoRST: No reset generated when entering in STOP
  *     @arg OB_STOP_RST: Reset generated when entering in STOP
  * @param  OB_STDBY: Reset event when entering Standby mode.
  *   This parameter can be one of the following values:
  *     @arg OB_STDBY_NoRST: No reset generated when entering in STANDBY
  *     @arg OB_STDBY_RST: Reset generated when entering in STANDBY
  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, 
  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
  */
FLASH_Status FLASH_UserOptionByteConfig(uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY)
{
  FLASH_Status status = FLASH_COMPLETE; 

  /* Check the parameters */
  assert_param(IS_OB_IWDG_SOURCE(OB_IWDG));
  assert_param(IS_OB_STOP_SOURCE(OB_STOP));
  assert_param(IS_OB_STDBY_SOURCE(OB_STDBY));

  /* Authorize the small information block programming */
  FLASH->OPTKEYR = FLASH_KEY1;
  FLASH->OPTKEYR = FLASH_KEY2;
  
  /* Wait for last operation to be completed */
  status = FLASH_WaitForLastOperation(ProgramTimeout);
  
  if(status == FLASH_COMPLETE)
  {  
    /* Enable the Option Bytes Programming operation */
    FLASH->CR |= CR_OPTPG_Set; 
           
    OB->USER = OB_IWDG | (uint16_t)(OB_STOP | (uint16_t)(OB_STDBY | ((uint16_t)0xF8))); 
  
    /* Wait for last operation to be completed */
    status = FLASH_WaitForLastOperation(ProgramTimeout);
    if(status != FLASH_TIMEOUT)
    {
      /* if the program operation is completed, disable the OPTPG Bit */
      FLASH->CR &= CR_OPTPG_Reset;
    }
  }    
  /* Return the Option Byte program Status */
  return status;
}

#ifdef STM32F10X_XL
/**
  * @brief  Configures to boot from Bank1 or Bank2.  
  * @note   This function can be used only for STM32F10x_XL density devices.
  * @param  FLASH_BOOT: select the FLASH Bank to boot from.
  *   This parameter can be one of the following values:
  *     @arg FLASH_BOOT_Bank1: At startup, if boot pins are set in boot from user Flash
  *        position and this parameter is selected the device will boot from Bank1(Default).
  *     @arg FLASH_BOOT_Bank2: At startup, if boot pins are set in boot from user Flash
  *        position and this parameter is selected the device will boot from Bank2 or Bank1,
  *        depending on the activation of the bank. The active banks are checked in
  *        the following order: Bank2, followed by Bank1.
  *        The active bank is recognized by the value programmed at the base address
  *        of the respective bank (corresponding to the initial stack pointer value
  *        in the interrupt vector table).
  *        For more information, please refer to AN2606 from www.st.com.    
  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, 
  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
  */
FLASH_Status FLASH_BootConfig(uint16_t FLASH_BOOT)
{ 
  FLASH_Status status = FLASH_COMPLETE; 
  assert_param(IS_FLASH_BOOT(FLASH_BOOT));
  /* Authorize the small information block programming */
  FLASH->OPTKEYR = FLASH_KEY1;
  FLASH->OPTKEYR = FLASH_KEY2;
  
  /* Wait for last operation to be completed */
  status = FLASH_WaitForLastOperation(ProgramTimeout);
  
  if(status == FLASH_COMPLETE)
  {  
    /* Enable the Option Bytes Programming operation */
    FLASH->CR |= CR_OPTPG_Set; 

    if(FLASH_BOOT == FLASH_BOOT_Bank1)
    {
      OB->USER |= OB_USER_BFB2;
    }
    else
    {
      OB->USER &= (uint16_t)(~(uint16_t)(OB_USER_BFB2));
    }
    /* Wait for last operation to be completed */
    status = FLASH_WaitForLastOperation(ProgramTimeout);
    if(status != FLASH_TIMEOUT)
    {
      /* if the program operation is completed, disable the OPTPG Bit */
      FLASH->CR &= CR_OPTPG_Reset;
    }
  }    
  /* Return the Option Byte program Status */
  return status;
}
#endif /* STM32F10X_XL */

/**
  * @brief  Returns the FLASH User Option Bytes values.
  * @note   This function can be used for all STM32F10x devices.
  * @param  None
  * @retval The FLASH User Option Bytes values:IWDG_SW(Bit0), RST_STOP(Bit1)
  *         and RST_STDBY(Bit2).
  */
uint32_t FLASH_GetUserOptionByte(void)
{
  /* Return the User Option Byte */
  return (uint32_t)(FLASH->OBR >> 2);
}

/**
  * @brief  Returns the FLASH Write Protection Option Bytes Register value.
  * @note   This function can be used for all STM32F10x devices.
  * @param  None
  * @retval The FLASH Write Protection  Option Bytes Register value
  */
uint32_t FLASH_GetWriteProtectionOptionByte(void)
{
  /* Return the Flash write protection Register value */
  return (uint32_t)(FLASH->WRPR);
}

/**
  * @brief  Checks whether the FLASH Read Out Protection Status is set or not.
  * @note   This function can be used for all STM32F10x devices.
  * @param  None
  * @retval FLASH ReadOut Protection Status(SET or RESET)
  */
FlagStatus FLASH_GetReadOutProtectionStatus(void)
{
  FlagStatus readoutstatus = RESET;
  if ((FLASH->OBR & RDPRT_Mask) != (uint32_t)RESET)
  {
    readoutstatus = SET;
  }
  else
  {
    readoutstatus = RESET;
  }
  return readoutstatus;
}

/**
  * @brief  Checks whether the FLASH Prefetch Buffer status is set or not.
  * @note   This function can be used for all STM32F10x devices.
  * @param  None
  * @retval FLASH Prefetch Buffer Status (SET or RESET).
  */
FlagStatus FLASH_GetPrefetchBufferStatus(void)
{
  FlagStatus bitstatus = RESET;
  
  if ((FLASH->ACR & ACR_PRFTBS_Mask) != (uint32_t)RESET)
  {
    bitstatus = SET;
  }
  else
  {
    bitstatus = RESET;
  }
  /* Return the new state of FLASH Prefetch Buffer Status (SET or RESET) */
  return bitstatus; 
}

/**
  * @brief  Enables or disables the specified FLASH interrupts.
  * @note   This function can be used for all STM32F10x devices.
  *         - For STM32F10X_XL devices, enables or disables the specified FLASH interrupts
              for Bank1 and Bank2.
  *         - For other devices it enables or disables the specified FLASH interrupts for Bank1.
  * @param  FLASH_IT: specifies the FLASH interrupt sources to be enabled or disabled.
  *   This parameter can be any combination of the following values:
  *     @arg FLASH_IT_ERROR: FLASH Error Interrupt
  *     @arg FLASH_IT_EOP: FLASH end of operation Interrupt
  * @param  NewState: new state of the specified Flash interrupts.
  *   This parameter can be: ENABLE or DISABLE.      
  * @retval None 
  */
void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState)
{
#ifdef STM32F10X_XL
  /* Check the parameters */
  assert_param(IS_FLASH_IT(FLASH_IT)); 
  assert_param(IS_FUNCTIONAL_STATE(NewState));

  if((FLASH_IT & 0x80000000) != 0x0)
  {
    if(NewState != DISABLE)
    {
      /* Enable the interrupt sources */
      FLASH->CR2 |= (FLASH_IT & 0x7FFFFFFF);
    }
    else
    {
      /* Disable the interrupt sources */
      FLASH->CR2 &= ~(uint32_t)(FLASH_IT & 0x7FFFFFFF);
    }
  }
  else
  {
    if(NewState != DISABLE)
    {
      /* Enable the interrupt sources */
      FLASH->CR |= FLASH_IT;
    }
    else
    {
      /* Disable the interrupt sources */
      FLASH->CR &= ~(uint32_t)FLASH_IT;
    }
  }
#else
  /* Check the parameters */
  assert_param(IS_FLASH_IT(FLASH_IT)); 
  assert_param(IS_FUNCTIONAL_STATE(NewState));

  if(NewState != DISABLE)
  {
    /* Enable the interrupt sources */
    FLASH->CR |= FLASH_IT;
  }
  else
  {
    /* Disable the interrupt sources */
    FLASH->CR &= ~(uint32_t)FLASH_IT;
  }
#endif /* STM32F10X_XL */
}

/**
  * @brief  Checks whether the specified FLASH flag is set or not.
  * @note   This function can be used for all STM32F10x devices.
  *         - For STM32F10X_XL devices, this function checks whether the specified 
  *           Bank1 or Bank2 flag is set or not.
  *         - For other devices, it checks whether the specified Bank1 flag is 
  *           set or not.
  * @param  FLASH_FLAG: specifies the FLASH flag to check.
  *   This parameter can be one of the following values:
  *     @arg FLASH_FLAG_BSY: FLASH Busy flag           
  *     @arg FLASH_FLAG_PGERR: FLASH Program error flag       
  *     @arg FLASH_FLAG_WRPRTERR: FLASH Write protected error flag      
  *     @arg FLASH_FLAG_EOP: FLASH End of Operation flag           
  *     @arg FLASH_FLAG_OPTERR:  FLASH Option Byte error flag     
  * @retval The new state of FLASH_FLAG (SET or RESET).
  */
FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG)
{
  FlagStatus bitstatus = RESET;

#ifdef STM32F10X_XL
  /* Check the parameters */
  assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ;
  if(FLASH_FLAG == FLASH_FLAG_OPTERR) 
  {
    if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET)
    {
      bitstatus = SET;
    }
    else
    {
      bitstatus = RESET;
    }
  }
  else
  {
    if((FLASH_FLAG & 0x80000000) != 0x0)
    {
      if((FLASH->SR2 & FLASH_FLAG) != (uint32_t)RESET)
      {
        bitstatus = SET;
      }
      else
      {
        bitstatus = RESET;
      }
    }
    else
    {
      if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET)
      {
        bitstatus = SET;
      }
      else
      {
        bitstatus = RESET;
      }
    }
  }
#else
  /* Check the parameters */
  assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ;
  if(FLASH_FLAG == FLASH_FLAG_OPTERR) 
  {
    if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET)
    {
      bitstatus = SET;
    }
    else
    {
      bitstatus = RESET;
    }
  }
  else
  {
   if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET)
    {
      bitstatus = SET;
    }
    else
    {
      bitstatus = RESET;
    }
  }
#endif /* STM32F10X_XL */

  /* Return the new state of FLASH_FLAG (SET or RESET) */
  return bitstatus;
}

/**
  * @brief  Clears the FLASH's pending flags.
  * @note   This function can be used for all STM32F10x devices.
  *         - For STM32F10X_XL devices, this function clears Bank1 or Bank2’s pending flags
  *         - For other devices, it clears Bank1’s pending flags.
  * @param  FLASH_FLAG: specifies the FLASH flags to clear.
  *   This parameter can be any combination of the following values:         
  *     @arg FLASH_FLAG_PGERR: FLASH Program error flag       
  *     @arg FLASH_FLAG_WRPRTERR: FLASH Write protected error flag      
  *     @arg FLASH_FLAG_EOP: FLASH End of Operation flag           
  * @retval None
  */
void FLASH_ClearFlag(uint32_t FLASH_FLAG)
{
#ifdef STM32F10X_XL
  /* Check the parameters */
  assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ;

  if((FLASH_FLAG & 0x80000000) != 0x0)
  {
    /* Clear the flags */
    FLASH->SR2 = FLASH_FLAG;
  }
  else
  {
    /* Clear the flags */
    FLASH->SR = FLASH_FLAG;
  }  

#else
  /* Check the parameters */
  assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ;
  
  /* Clear the flags */
  FLASH->SR = FLASH_FLAG;
#endif /* STM32F10X_XL */
}

/**
  * @brief  Returns the FLASH Status.
  * @note   This function can be used for all STM32F10x devices, it is equivalent
  *         to FLASH_GetBank1Status function.
  * @param  None
  * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
  *         FLASH_ERROR_WRP or FLASH_COMPLETE
  */
FLASH_Status FLASH_GetStatus(void)
{
  FLASH_Status flashstatus = FLASH_COMPLETE;
  
  if((FLASH->SR & FLASH_FLAG_BSY) == FLASH_FLAG_BSY) 
  {
    flashstatus = FLASH_BUSY;
  }
  else 
  {  
    if((FLASH->SR & FLASH_FLAG_PGERR) != 0)
    { 
      flashstatus = FLASH_ERROR_PG;
    }
    else 
    {
      if((FLASH->SR & FLASH_FLAG_WRPRTERR) != 0 )
      {
        flashstatus = FLASH_ERROR_WRP;
      }
      else
      {
        flashstatus = FLASH_COMPLETE;
      }
    }
  }
  /* Return the Flash Status */
  return flashstatus;
}

/**
  * @brief  Returns the FLASH Bank1 Status.
  * @note   This function can be used for all STM32F10x devices, it is equivalent
  *         to FLASH_GetStatus function.
  * @param  None
  * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
  *         FLASH_ERROR_WRP or FLASH_COMPLETE
  */
FLASH_Status FLASH_GetBank1Status(void)
{
  FLASH_Status flashstatus = FLASH_COMPLETE;
  
  if((FLASH->SR & FLASH_FLAG_BANK1_BSY) == FLASH_FLAG_BSY) 
  {
    flashstatus = FLASH_BUSY;
  }
  else 
  {  
    if((FLASH->SR & FLASH_FLAG_BANK1_PGERR) != 0)
    { 
      flashstatus = FLASH_ERROR_PG;
    }
    else 
    {
      if((FLASH->SR & FLASH_FLAG_BANK1_WRPRTERR) != 0 )
      {
        flashstatus = FLASH_ERROR_WRP;
      }
      else
      {
        flashstatus = FLASH_COMPLETE;
      }
    }
  }
  /* Return the Flash Status */
  return flashstatus;
}

#ifdef STM32F10X_XL
/**
  * @brief  Returns the FLASH Bank2 Status.
  * @note   This function can be used for STM32F10x_XL density devices.
  * @param  None
  * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
  *        FLASH_ERROR_WRP or FLASH_COMPLETE
  */
FLASH_Status FLASH_GetBank2Status(void)
{
  FLASH_Status flashstatus = FLASH_COMPLETE;
  
  if((FLASH->SR2 & (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) == (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) 
  {
    flashstatus = FLASH_BUSY;
  }
  else 
  {  
    if((FLASH->SR2 & (FLASH_FLAG_BANK2_PGERR & 0x7FFFFFFF)) != 0)
    { 
      flashstatus = FLASH_ERROR_PG;
    }
    else 
    {
      if((FLASH->SR2 & (FLASH_FLAG_BANK2_WRPRTERR & 0x7FFFFFFF)) != 0 )
      {
        flashstatus = FLASH_ERROR_WRP;
      }
      else
      {
        flashstatus = FLASH_COMPLETE;
      }
    }
  }
  /* Return the Flash Status */
  return flashstatus;
}
#endif /* STM32F10X_XL */
/**
  * @brief  Waits for a Flash operation to complete or a TIMEOUT to occur.
  * @note   This function can be used for all STM32F10x devices, 
  *         it is equivalent to FLASH_WaitForLastBank1Operation.
  *         - For STM32F10X_XL devices this function waits for a Bank1 Flash operation
  *           to complete or a TIMEOUT to occur.
  *         - For all other devices it waits for a Flash operation to complete 
  *           or a TIMEOUT to occur.
  * @param  Timeout: FLASH programming Timeout
  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
  */
FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout)
{ 
  FLASH_Status status = FLASH_COMPLETE;
   
  /* Check for the Flash Status */
  status = FLASH_GetBank1Status();
  /* Wait for a Flash operation to complete or a TIMEOUT to occur */
  while((status == FLASH_BUSY) && (Timeout != 0x00))
  {
    status = FLASH_GetBank1Status();
    Timeout--;
  }
  if(Timeout == 0x00 )
  {
    status = FLASH_TIMEOUT;
  }
  /* Return the operation status */
  return status;
}

/**
  * @brief  Waits for a Flash operation on Bank1 to complete or a TIMEOUT to occur.
  * @note   This function can be used for all STM32F10x devices, 
  *         it is equivalent to FLASH_WaitForLastOperation.
  * @param  Timeout: FLASH programming Timeout
  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
  */
FLASH_Status FLASH_WaitForLastBank1Operation(uint32_t Timeout)
{ 
  FLASH_Status status = FLASH_COMPLETE;
   
  /* Check for the Flash Status */
  status = FLASH_GetBank1Status();
  /* Wait for a Flash operation to complete or a TIMEOUT to occur */
  while((status == FLASH_FLAG_BANK1_BSY) && (Timeout != 0x00))
  {
    status = FLASH_GetBank1Status();
    Timeout--;
  }
  if(Timeout == 0x00 )
  {
    status = FLASH_TIMEOUT;
  }
  /* Return the operation status */
  return status;
}

#ifdef STM32F10X_XL
/**
  * @brief  Waits for a Flash operation on Bank2 to complete or a TIMEOUT to occur.
  * @note   This function can be used only for STM32F10x_XL density devices.
  * @param  Timeout: FLASH programming Timeout
  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
  */
FLASH_Status FLASH_WaitForLastBank2Operation(uint32_t Timeout)
{ 
  FLASH_Status status = FLASH_COMPLETE;
   
  /* Check for the Flash Status */
  status = FLASH_GetBank2Status();
  /* Wait for a Flash operation to complete or a TIMEOUT to occur */
  while((status == (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) && (Timeout != 0x00))
  {
    status = FLASH_GetBank2Status();
    Timeout--;
  }
  if(Timeout == 0x00 )
  {
    status = FLASH_TIMEOUT;
  }
  /* Return the operation status */
  return status;
}
#endif /* STM32F10X_XL */

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/