|
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
|
/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011,2012 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
---
A special exception to the GPL can be applied should you wish to distribute
a combined work that includes ChibiOS/RT, without being obliged to provide
the source code for any proprietary components. See the file exception.txt
for full details of how and when the exception can be applied.
*/
/**
* @file AT91SAM7/serial_lld.c
* @brief AT91SAM7 low level serial driver code.
*
* @addtogroup SERIAL
* @{
*/
#include "ch.h"
#include "hal.h"
#if HAL_USE_SERIAL || defined(__DOXYGEN__)
#if (SAM7_PLATFORM == SAM7S64) || (SAM7_PLATFORM == SAM7S128) || \
(SAM7_PLATFORM == SAM7S256) || (SAM7_PLATFORM == SAM7S512)
#define SAM7_USART0_RX AT91C_PA5_RXD0
#define SAM7_USART0_TX AT91C_PA6_TXD0
#define SAM7_USART1_RX AT91C_PA21_RXD1
#define SAM7_USART1_TX AT91C_PA22_TXD1
#define SAM7_DBGU_RX AT91C_PA9_DRXD
#define SAM7_DBGU_TX AT91C_PA10_DTXD
#elif (SAM7_PLATFORM == SAM7X128) || (SAM7_PLATFORM == SAM7X256) || \
(SAM7_PLATFORM == SAM7X512)
#define SAM7_USART0_RX AT91C_PA0_RXD0
#define SAM7_USART0_TX AT91C_PA1_TXD0
#define SAM7_USART1_RX AT91C_PA5_RXD1
#define SAM7_USART1_TX AT91C_PA6_TXD1
#define SAM7_DBGU_RX AT91C_PA27_DRXD
#define SAM7_DBGU_TX AT91C_PA28_DTXD
#else
#error "serial lines not defined for this SAM7 version"
#endif
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
#if USE_SAM7_USART0 || defined(__DOXYGEN__)
/** @brief USART0 serial driver identifier.*/
SerialDriver SD1;
#endif
#if USE_SAM7_USART1 || defined(__DOXYGEN__)
/** @brief USART1 serial driver identifier.*/
SerialDriver SD2;
#endif
#if USE_SAM7_DBGU_UART || defined(__DOXYGEN__)
/** @brief DBGU_UART serial driver identifier.*/
SerialDriver SD3;
#endif
/*===========================================================================*/
/* Driver local variables. */
/*===========================================================================*/
/** @brief Driver default configuration.*/
static const SerialConfig default_config = {
SERIAL_DEFAULT_BITRATE,
AT91C_US_USMODE_NORMAL | AT91C_US_CLKS_CLOCK |
AT91C_US_CHRL_8_BITS | AT91C_US_PAR_NONE | AT91C_US_NBSTOP_1_BIT
};
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
/**
* @brief USART initialization.
*
* @param[in] sdp communication channel associated to the USART
* @param[in] config the architecture-dependent serial driver configuration
*/
static void usart_init(SerialDriver *sdp, const SerialConfig *config) {
AT91PS_USART u = sdp->usart;
/* Disables IRQ sources and stop operations.*/
u->US_IDR = 0xFFFFFFFF;
u->US_CR = AT91C_US_RSTRX | AT91C_US_RSTTX | AT91C_US_RSTSTA;
/* New parameters setup.*/
if (config->sc_mr & AT91C_US_OVER)
u->US_BRGR = MCK / (config->sc_speed * 8);
else
u->US_BRGR = MCK / (config->sc_speed * 16);
u->US_MR = config->sc_mr;
u->US_RTOR = 0;
u->US_TTGR = 0;
/* Enables operations and IRQ sources.*/
u->US_CR = AT91C_US_RXEN | AT91C_US_TXEN | AT91C_US_DTREN | AT91C_US_RTSEN;
u->US_IER = AT91C_US_RXRDY | AT91C_US_OVRE | AT91C_US_FRAME | AT91C_US_PARE |
AT91C_US_RXBRK;
}
/**
* @brief USART de-initialization.
*
* @param[in] u pointer to an USART I/O block
*/
static void usart_deinit(AT91PS_USART u) {
/* Disables IRQ sources and stop operations.*/
u->US_IDR = 0xFFFFFFFF;
u->US_CR = AT91C_US_RSTRX | AT91C_US_RSTTX | AT91C_US_RSTSTA;
u->US_MR = 0;
u->US_RTOR = 0;
u->US_TTGR = 0;
}
/**
* @brief Error handling routine.
*
* @param[in] err USART CSR register value
* @param[in] sdp communication channel associated to the USART
*/
static void set_error(SerialDriver *sdp, AT91_REG csr) {
ioflags_t sts = 0;
if (csr & AT91C_US_OVRE)
sts |= SD_OVERRUN_ERROR;
if (csr & AT91C_US_PARE)
sts |= SD_PARITY_ERROR;
if (csr & AT91C_US_FRAME)
sts |= SD_FRAMING_ERROR;
if (csr & AT91C_US_RXBRK)
sts |= SD_BREAK_DETECTED;
chSysLockFromIsr();
chIOAddFlagsI(sdp, sts);
chSysUnlockFromIsr();
}
#if defined(__GNUC__)
__attribute__((noinline))
#endif
#if !USE_SAM7_DBGU_UART
static
#endif
/**
* @brief Common IRQ handler.
*
* @param[in] sdp communication channel associated to the USART
*/
void sd_lld_serve_interrupt(SerialDriver *sdp) {
uint32_t csr;
AT91PS_USART u = sdp->usart;
csr = u->US_CSR;
if (csr & AT91C_US_RXRDY) {
chSysLockFromIsr();
sdIncomingDataI(sdp, u->US_RHR);
chSysUnlockFromIsr();
}
if ((u->US_IMR & AT91C_US_TXRDY) && (csr & AT91C_US_TXRDY)) {
msg_t b;
chSysLockFromIsr();
b = chOQGetI(&sdp->oqueue);
if (b < Q_OK) {
chIOAddFlagsI(sdp, IO_OUTPUT_EMPTY);
u->US_IDR = AT91C_US_TXRDY;
}
else
u->US_THR = b;
chSysUnlockFromIsr();
}
csr &= (AT91C_US_OVRE | AT91C_US_FRAME | AT91C_US_PARE | AT91C_US_RXBRK);
if (csr != 0) {
set_error(sdp, csr);
u->US_CR = AT91C_US_RSTSTA;
}
AT91C_BASE_AIC->AIC_EOICR = 0;
}
#if USE_SAM7_USART0 || defined(__DOXYGEN__)
static void notify1(GenericQueue *qp) {
(void)qp;
AT91C_BASE_US0->US_IER = AT91C_US_TXRDY;
}
#endif
#if USE_SAM7_USART1 || defined(__DOXYGEN__)
static void notify2(GenericQueue *qp) {
(void)qp;
AT91C_BASE_US1->US_IER = AT91C_US_TXRDY;
}
#endif
#if USE_SAM7_DBGU_UART || defined(__DOXYGEN__)
static void notify3(GenericQueue *qp) {
(void)qp;
AT91C_BASE_DBGU->DBGU_IER = AT91C_US_TXRDY;
}
#endif
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
#if USE_SAM7_USART0 || defined(__DOXYGEN__)
/**
* @brief USART0 interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(USART0IrqHandler) {
CH_IRQ_PROLOGUE();
sd_lld_serve_interrupt(&SD1);
AT91C_BASE_AIC->AIC_EOICR = 0;
CH_IRQ_EPILOGUE();
}
#endif
#if USE_SAM7_USART1 || defined(__DOXYGEN__)
/**
* @brief USART1 interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(USART1IrqHandler) {
CH_IRQ_PROLOGUE();
sd_lld_serve_interrupt(&SD2);
AT91C_BASE_AIC->AIC_EOICR = 0;
CH_IRQ_EPILOGUE();
}
#endif
/* note - DBGU_UART IRQ is the SysIrq in board.c
since it's not vectored separately by the AIC.*/
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Low level serial driver initialization.
*
* @notapi
*/
void sd_lld_init(void) {
#if USE_SAM7_USART0
sdObjectInit(&SD1, NULL, notify1);
SD1.usart = AT91C_BASE_US0;
AT91C_BASE_PIOA->PIO_PDR = SAM7_USART0_RX | SAM7_USART0_TX;
AT91C_BASE_PIOA->PIO_ASR = SAM7_USART0_RX | SAM7_USART0_TX;
AT91C_BASE_PIOA->PIO_PPUDR = SAM7_USART0_RX | SAM7_USART0_TX;
AIC_ConfigureIT(AT91C_ID_US0,
AT91C_AIC_SRCTYPE_HIGH_LEVEL | SAM7_USART0_PRIORITY,
USART0IrqHandler);
#endif
#if USE_SAM7_USART1
sdObjectInit(&SD2, NULL, notify2);
SD2.usart = AT91C_BASE_US1;
AT91C_BASE_PIOA->PIO_PDR = SAM7_USART1_RX | SAM7_USART1_TX;
AT91C_BASE_PIOA->PIO_ASR = SAM7_USART1_RX | SAM7_USART1_TX;
AT91C_BASE_PIOA->PIO_PPUDR = SAM7_USART1_RX | SAM7_USART1_TX;
AIC_ConfigureIT(AT91C_ID_US1,
AT91C_AIC_SRCTYPE_HIGH_LEVEL | SAM7_USART1_PRIORITY,
USART1IrqHandler);
#endif
#if USE_SAM7_DBGU_UART
sdObjectInit(&SD3, NULL, notify3);
/* this is a little cheap, but OK for now since there's enough overlap
between dbgu and usart register maps. it means we can reuse all the
same usart interrupt handling and config that already exists.*/
SD3.usart = (AT91PS_USART)AT91C_BASE_DBGU;
AT91C_BASE_PIOA->PIO_PDR = SAM7_DBGU_RX | SAM7_DBGU_TX;
AT91C_BASE_PIOA->PIO_ASR = SAM7_DBGU_RX | SAM7_DBGU_TX;
AT91C_BASE_PIOA->PIO_PPUDR = SAM7_DBGU_RX | SAM7_DBGU_TX;
#endif
}
/**
* @brief Low level serial driver configuration and (re)start.
*
* @param[in] sdp pointer to a @p SerialDriver object
* @param[in] config the architecture-dependent serial driver configuration.
* If this parameter is set to @p NULL then a default
* configuration is used.
*
* @notapi
*/
void sd_lld_start(SerialDriver *sdp, const SerialConfig *config) {
if (config == NULL)
config = &default_config;
if (sdp->state == SD_STOP) {
#if USE_SAM7_USART0
if (&SD1 == sdp) {
/* Starts the clock and clears possible sources of immediate interrupts.*/
AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_US0);
/* Enables associated interrupt vector.*/
AIC_EnableIT(AT91C_ID_US0);
}
#endif
#if USE_SAM7_USART1
if (&SD2 == sdp) {
/* Starts the clock and clears possible sources of immediate interrupts.*/
AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_US1);
/* Enables associated interrupt vector.*/
AIC_EnableIT(AT91C_ID_US1);
}
#endif
/* Note - no explicit start for SD3 (DBGU_UART) since it's not included
in the AIC or PMC.*/
}
usart_init(sdp, config);
}
/**
* @brief Low level serial driver stop.
* @details De-initializes the USART, stops the associated clock, resets the
* interrupt vector.
*
* @param[in] sdp pointer to a @p SerialDriver object
*
* @notapi
*/
void sd_lld_stop(SerialDriver *sdp) {
if (sdp->state == SD_READY) {
usart_deinit(sdp->usart);
#if USE_SAM7_USART0
if (&SD1 == sdp) {
AT91C_BASE_PMC->PMC_PCDR = (1 << AT91C_ID_US0);
AIC_DisableIT(AT91C_ID_US0);
return;
}
#endif
#if USE_SAM7_USART1
if (&SD2 == sdp) {
AT91C_BASE_PMC->PMC_PCDR = (1 << AT91C_ID_US1);
AIC_DisableIT(AT91C_ID_US1);
return;
}
#endif
#if USE_SAM7_DBGU_UART
if (&SD3 == sdp) {
AT91C_BASE_DBGU->DBGU_IDR = 0xFFFFFFFF;
return;
}
#endif
}
}
#endif /* HAL_USE_SERIAL */
/** @} */
|
