|
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
|
/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011,2012 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
---
A special exception to the GPL can be applied should you wish to distribute
a combined work that includes ChibiOS/RT, without being obliged to provide
the source code for any proprietary components. See the file exception.txt
for full details of how and when the exception can be applied.
*/
/**
* @defgroup STM32F2xx_DRIVERS STM32F2xx Drivers
* @details This section describes all the supported drivers on the STM32F2xx
* platform and the implementation details of the single drivers.
*
* @ingroup platforms
*/
/**
* @defgroup STM32F2xx_HAL STM32F2xx Initialization Support
* @details The STM32F2xx HAL support is responsible for system initialization.
*
* @section stm32f2xx_hal_1 Supported HW resources
* - PLL1.
* - PLL2.
* - RCC.
* - Flash.
* .
* @section stm32f2xx_hal_2 STM32F2xx HAL driver implementation features
* - PLL startup and stabilization.
* - Clock tree initialization.
* - Clock source selection.
* - Flash wait states initialization based on the selected clock options.
* - SYSTICK initialization based on current clock and kernel required rate.
* - DMA support initialization.
* .
* @ingroup STM32F2xx_DRIVERS
*/
/**
* @defgroup STM32F2xx_ADC STM32F2xx ADC Support
* @details The STM32F2xx ADC driver supports the ADC peripherals using DMA
* channels for maximum performance.
*
* @section stm32f2xx_adc_1 Supported HW resources
* - ADC1.
* - ADC2.
* - ADC3.
* - DMA2.
* .
* @section stm32f2xx_adc_2 STM32F2xx ADC driver implementation features
* - Clock stop for reduced power usage when the driver is in stop state.
* - Streaming conversion using DMA for maximum performance.
* - Programmable ADC interrupt priority level.
* - Programmable DMA bus priority for each DMA channel.
* - Programmable DMA interrupt priority for each DMA channel.
* - DMA and ADC errors detection.
* .
* @ingroup STM32F2xx_DRIVERS
*/
/**
* @defgroup STM32F2xx_CAN STM32F2xx CAN Support
* @details The STM32F2xx CAN driver uses the CAN peripherals.
*
* @section stm32f2xx_can_1 Supported HW resources
* - bxCAN1.
* .
* @section stm32f2xx_can_2 STM32F2xx CAN driver implementation features
* - Clock stop for reduced power usage when the driver is in stop state.
* - Support for bxCAN sleep mode.
* - Programmable bxCAN interrupts priority level.
* .
* @ingroup STM32F2xx_DRIVERS
*/
/**
* @defgroup STM32F2xx_EXT STM32F2xx EXT Support
* @details The STM32F2xx EXT driver uses the EXTI peripheral.
*
* @section stm32f2xx_ext_1 Supported HW resources
* - EXTI.
* .
* @section stm32f2xx_ext_2 STM32F2xx EXT driver implementation features
* - Each EXTI channel can be independently enabled and programmed.
* - Programmable EXTI interrupts priority level.
* - Capability to work as event sources (WFE) rather than interrupt sources.
* .
* @ingroup STM32F2xx_DRIVERS
*/
/**
* @defgroup STM32F2xx_GPT STM32F2xx GPT Support
* @details The STM32F2xx GPT driver uses the TIMx peripherals.
*
* @section stm32f2xx_gpt_1 Supported HW resources
* - TIM1.
* - TIM2.
* - TIM3.
* - TIM4.
* - TIM5.
* - TIM8.
* .
* @section stm32f2xx_gpt_2 STM32F2xx GPT driver implementation features
* - Each timer can be independently enabled and programmed. Unused
* peripherals are left in low power mode.
* - Programmable TIMx interrupts priority level.
* .
* @ingroup STM32F2xx_DRIVERS
*/
/**
* @defgroup STM32F2xx_ICU STM32F2xx ICU Support
* @details The STM32F2xx ICU driver uses the TIMx peripherals.
*
* @section stm32f2xx_icu_1 Supported HW resources
* - TIM1.
* - TIM2.
* - TIM3.
* - TIM4.
* - TIM5.
* - TIM8.
* .
* @section stm32f2xx_icu_2 STM32F2xx ICU driver implementation features
* - Each timer can be independently enabled and programmed. Unused
* peripherals are left in low power mode.
* - Programmable TIMx interrupts priority level.
* .
* @ingroup STM32F2xx_DRIVERS
*/
/**
* @defgroup STM32F2xx_MAC STM32F2xx MAC Support
* @details The STM32F2xx MAC driver supports the ETH peripheral.
*
* @section stm32f2xx_mac_1 Supported HW resources
* - ETH.
* - PHY (external).
* .
* @section stm32f2xx_mac_2 STM32F2xx MAC driver implementation features
* - Dedicated DMA operations.
* - Support for checksum off-loading.
* .
* @ingroup STM32F2xx_DRIVERS
*/
/**
* @defgroup STM32F2xx_PAL STM32F2xx PAL Support
* @details The STM32F2xx PAL driver uses the GPIO peripherals.
*
* @section stm32f2xx_pal_1 Supported HW resources
* - GPIOA.
* - GPIOB.
* - GPIOC.
* - GPIOD.
* - GPIOE.
* - GPIOF.
* - GPIOG.
* - GPIOH.
* - GPIOI.
* .
* @section stm32f2xx_pal_2 STM32F2xx PAL driver implementation features
* The PAL driver implementation fully supports the following hardware
* capabilities:
* - 16 bits wide ports.
* - Atomic set/reset functions.
* - Atomic set+reset function (atomic bus operations).
* - Output latched regardless of the pad setting.
* - Direct read of input pads regardless of the pad setting.
* .
* @section stm32f2xx_pal_3 Supported PAL setup modes
* The STM32F2xx PAL driver supports the following I/O modes:
* - @p PAL_MODE_RESET.
* - @p PAL_MODE_UNCONNECTED.
* - @p PAL_MODE_INPUT.
* - @p PAL_MODE_INPUT_PULLUP.
* - @p PAL_MODE_INPUT_PULLDOWN.
* - @p PAL_MODE_INPUT_ANALOG.
* - @p PAL_MODE_OUTPUT_PUSHPULL.
* - @p PAL_MODE_OUTPUT_OPENDRAIN.
* - @p PAL_MODE_ALTERNATE (non standard).
* .
* Any attempt to setup an invalid mode is ignored.
*
* @section stm32f2xx_pal_4 Suboptimal behavior
* The STM32F2xx GPIO is less than optimal in several areas, the limitations
* should be taken in account while using the PAL driver:
* - Pad/port toggling operations are not atomic.
* - Pad/group mode setup is not atomic.
* .
* @ingroup STM32F2xx_DRIVERS
*/
/**
* @defgroup STM32F2xx_PWM STM32F2xx PWM Support
* @details The STM32F2xx PWM driver uses the TIMx peripherals.
*
* @section stm32f2xx_pwm_1 Supported HW resources
* - TIM1.
* - TIM2.
* - TIM3.
* - TIM4.
* - TIM5.
* - TIM8.
* .
* @section stm32f2xx_pwm_2 STM32F2xx PWM driver implementation features
* - Each timer can be independently enabled and programmed. Unused
* peripherals are left in low power mode.
* - Four independent PWM channels per timer.
* - Programmable TIMx interrupts priority level.
* .
* @ingroup STM32F2xx_DRIVERS
*/
/**
* @defgroup STM32F2xx_SDC STM32F2xx SDC Support
* @details The STM32F2xx SDC driver uses the SDIO peripheral.
*
* @section stm32f2xx_sdc_1 Supported HW resources
* - SDIO.
* - DMA2.
* .
* @section stm32f2xx_sdc_2 STM32F4xx SDC driver implementation features
* - Clock stop for reduced power usage when the driver is in stop state.
* - Programmable interrupt priority.
* - DMA is used for receiving and transmitting.
* - Programmable DMA bus priority for each DMA channel.
* .
* @ingroup STM32F2xx_DRIVERS
*/
/**
* @defgroup STM32F2xx_SERIAL STM32F2xx Serial Support
* @details The STM32F2xx Serial driver uses the USART/UART peripherals in a
* buffered, interrupt driven, implementation.
*
* @section stm32f2xx_serial_1 Supported HW resources
* The serial driver can support any of the following hardware resources:
* - USART1.
* - USART2.
* - USART3.
* - UART4.
* - UART5.
* - USART6.
* .
* @section stm32f2xx_serial_2 STM32F2xx Serial driver implementation features
* - Clock stop for reduced power usage when the driver is in stop state.
* - Each UART/USART can be independently enabled and programmed. Unused
* peripherals are left in low power mode.
* - Fully interrupt driven.
* - Programmable priority levels for each UART/USART.
* .
* @ingroup STM32F2xx_DRIVERS
*/
/**
* @defgroup STM32F2xx_SPI STM32F2xx SPI Support
* @details The SPI driver supports the STM32F2xx SPI peripherals using DMA
* channels for maximum performance.
*
* @section stm32f2xx_spi_1 Supported HW resources
* - SPI1.
* - SPI2.
* - SPI3.
* - DMA1.
* - DMA2.
* .
* @section stm32f2xx_spi_2 STM32F2xx SPI driver implementation features
* - Clock stop for reduced power usage when the driver is in stop state.
* - Each SPI can be independently enabled and programmed. Unused
* peripherals are left in low power mode.
* - Programmable interrupt priority levels for each SPI.
* - DMA is used for receiving and transmitting.
* - Programmable DMA bus priority for each DMA channel.
* - Programmable DMA interrupt priority for each DMA channel.
* - Programmable DMA error hook.
* .
* @ingroup STM32F2xx_DRIVERS
*/
/**
* @defgroup STM32F2xx_UART STM32F2xx UART Support
* @details The UART driver supports the STM32F2xx USART peripherals using DMA
* channels for maximum performance.
*
* @section stm32f2xx_uart_1 Supported HW resources
* The UART driver can support any of the following hardware resources:
* - USART1.
* - USART2.
* - USART3.
* - DMA1.
* - DMA2.
* .
* @section stm32f2xx_uart_2 STM32F2xx UART driver implementation features
* - Clock stop for reduced power usage when the driver is in stop state.
* - Each UART/USART can be independently enabled and programmed. Unused
* peripherals are left in low power mode.
* - Programmable interrupt priority levels for each UART/USART.
* - DMA is used for receiving and transmitting.
* - Programmable DMA bus priority for each DMA channel.
* - Programmable DMA interrupt priority for each DMA channel.
* - Programmable DMA error hook.
* .
* @ingroup STM32F2xx_DRIVERS
*/
/**
* @defgroup STM32F2xx_PLATFORM_DRIVERS STM32F2xx Platform Drivers
* @details Platform support drivers. Platform drivers do not implement HAL
* standard driver templates, their role is to support platform
* specific functionalities.
*
* @ingroup STM32F2xx_DRIVERS
*/
/**
* @defgroup STM32F2xx_DMA STM32F2xx DMA Support
* @details This DMA helper driver is used by the other drivers in order to
* access the shared DMA resources in a consistent way.
*
* @section stm32f2xx_dma_1 Supported HW resources
* The DMA driver can support any of the following hardware resources:
* - DMA1.
* - DMA2.
* .
* @section stm32f2xx_dma_2 STM32F2xx DMA driver implementation features
* - Exports helper functions/macros to the other drivers that share the
* DMA resource.
* - Automatic DMA clock stop when not in use by any driver.
* - DMA streams and interrupt vectors sharing among multiple drivers.
* .
* @ingroup STM32F2xx_PLATFORM_DRIVERS
*/
/**
* @defgroup STM32F2xx_RCC STM32F2xx RCC Support
* @details This RCC helper driver is used by the other drivers in order to
* access the shared RCC resources in a consistent way.
*
* @section stm32f2xx_rcc_1 Supported HW resources
* - RCC.
* .
* @section stm32f2xx_rcc_2 STM32F2xx RCC driver implementation features
* - Peripherals reset.
* - Peripherals clock enable.
* - Peripherals clock disable.
* .
* @ingroup STM32F2xx_PLATFORM_DRIVERS
*/
|
