|
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
|
/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011,2012 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
---
A special exception to the GPL can be applied should you wish to distribute
a combined work that includes ChibiOS/RT, without being obliged to provide
the source code for any proprietary components. See the file exception.txt
for full details of how and when the exception can be applied.
*/
/**
* @file STM32/serial_lld.h
* @brief STM32 low level serial driver header.
*
* @addtogroup SERIAL
* @{
*/
#ifndef _SERIAL_LLD_H_
#define _SERIAL_LLD_H_
#if HAL_USE_SERIAL || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver constants. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/
/**
* @name Configuration options
* @{
*/
/**
* @brief USART1 driver enable switch.
* @details If set to @p TRUE the support for USART1 is included.
* @note The default is @p TRUE.
*/
#if !defined(STM32_SERIAL_USE_USART1) || defined(__DOXYGEN__)
#define STM32_SERIAL_USE_USART1 TRUE
#endif
/**
* @brief USART2 driver enable switch.
* @details If set to @p TRUE the support for USART2 is included.
* @note The default is @p TRUE.
*/
#if !defined(STM32_SERIAL_USE_USART2) || defined(__DOXYGEN__)
#define STM32_SERIAL_USE_USART2 TRUE
#endif
/**
* @brief USART3 driver enable switch.
* @details If set to @p TRUE the support for USART3 is included.
* @note The default is @p TRUE.
*/
#if !defined(STM32_SERIAL_USE_USART3) || defined(__DOXYGEN__)
#define STM32_SERIAL_USE_USART3 TRUE
#endif
/**
* @brief UART4 driver enable switch.
* @details If set to @p TRUE the support for UART4 is included.
* @note The default is @p TRUE.
*/
#if !defined(STM32_SERIAL_USE_UART4) || defined(__DOXYGEN__)
#define STM32_SERIAL_USE_UART4 TRUE
#endif
/**
* @brief UART5 driver enable switch.
* @details If set to @p TRUE the support for UART5 is included.
* @note The default is @p TRUE.
*/
#if !defined(STM32_SERIAL_USE_UART5) || defined(__DOXYGEN__)
#define STM32_SERIAL_USE_UART5 TRUE
#endif
/**
* @brief USART6 driver enable switch.
* @details If set to @p TRUE the support for USART6 is included.
* @note The default is @p TRUE.
*/
#if !defined(STM32_SERIAL_USE_USART6) || defined(__DOXYGEN__)
#define STM32_SERIAL_USE_USART6 TRUE
#endif
/**
* @brief USART1 interrupt priority level setting.
*/
#if !defined(STM32_SERIAL_USART1_PRIORITY) || defined(__DOXYGEN__)
#define STM32_SERIAL_USART1_PRIORITY 12
#endif
/**
* @brief USART2 interrupt priority level setting.
*/
#if !defined(STM32_SERIAL_USART2_PRIORITY) || defined(__DOXYGEN__)
#define STM32_SERIAL_USART2_PRIORITY 12
#endif
/**
* @brief USART3 interrupt priority level setting.
*/
#if !defined(STM32_SERIAL_USART3_PRIORITY) || defined(__DOXYGEN__)
#define STM32_SERIAL_USART3_PRIORITY 12
#endif
/**
* @brief UART4 interrupt priority level setting.
*/
#if !defined(STM32_SERIAL_UART4_PRIORITY) || defined(__DOXYGEN__)
#define STM32_SERIAL_UART4_PRIORITY 12
#endif
/**
* @brief UART5 interrupt priority level setting.
*/
#if !defined(STM32_SERIAL_UART5_PRIORITY) || defined(__DOXYGEN__)
#define STM32_SERIAL_UART5_PRIORITY 12
#endif
/**
* @brief USART6 interrupt priority level setting.
*/
#if !defined(STM32_SERIAL_USART6_PRIORITY) || defined(__DOXYGEN__)
#define STM32_SERIAL_USART6_PRIORITY 12
#endif
/** @} */
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
#if STM32_SERIAL_USE_USART1 && !STM32_HAS_USART1
#error "USART1 not present in the selected device"
#endif
#if STM32_SERIAL_USE_USART2 && !STM32_HAS_USART2
#error "USART2 not present in the selected device"
#endif
#if STM32_SERIAL_USE_USART3 && !STM32_HAS_USART3
#error "USART3 not present in the selected device"
#endif
#if STM32_SERIAL_USE_UART4 && !STM32_HAS_UART4
#error "UART4 not present in the selected device"
#endif
#if STM32_SERIAL_USE_UART5 && !STM32_HAS_UART5
#error "UART5 not present in the selected device"
#endif
#if STM32_SERIAL_USE_USART6 && !STM32_HAS_USART6
#error "USART6 not present in the selected device"
#endif
#if !STM32_SERIAL_USE_USART1 && !STM32_SERIAL_USE_USART2 && \
!STM32_SERIAL_USE_USART3 && !STM32_SERIAL_USE_UART4 && \
!STM32_SERIAL_USE_UART5 && !STM32_SERIAL_USE_USART6
#error "SERIAL driver activated but no USART/UART peripheral assigned"
#endif
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
/**
* @brief STM32 Serial Driver configuration structure.
* @details An instance of this structure must be passed to @p sdStart()
* in order to configure and start a serial driver operations.
* @note This structure content is architecture dependent, each driver
* implementation defines its own version and the custom static
* initializers.
*/
typedef struct {
/**
* @brief Bit rate.
*/
uint32_t sc_speed;
/**
* @brief Initialization value for the CR1 register.
*/
uint16_t sc_cr1;
/**
* @brief Initialization value for the CR2 register.
*/
uint16_t sc_cr2;
/**
* @brief Initialization value for the CR3 register.
*/
uint16_t sc_cr3;
} SerialConfig;
/**
* @brief @p SerialDriver specific data.
*/
#define _serial_driver_data \
_base_asynchronous_channel_data \
/* Driver state.*/ \
sdstate_t state; \
/* Input queue.*/ \
InputQueue iqueue; \
/* Output queue.*/ \
OutputQueue oqueue; \
/* Input circular buffer.*/ \
uint8_t ib[SERIAL_BUFFERS_SIZE]; \
/* Output circular buffer.*/ \
uint8_t ob[SERIAL_BUFFERS_SIZE]; \
/* End of the mandatory fields.*/ \
/* Pointer to the USART registers block.*/ \
USART_TypeDef *usart;
/*===========================================================================*/
/* Driver macros. */
/*===========================================================================*/
/*
* Extra USARTs definitions here (missing from the ST header file).
*/
#define USART_CR2_STOP1_BITS (0 << 12) /**< @brief CR2 1 stop bit value.*/
#define USART_CR2_STOP0P5_BITS (1 << 12) /**< @brief CR2 0.5 stop bit value.*/
#define USART_CR2_STOP2_BITS (2 << 12) /**< @brief CR2 2 stop bit value.*/
#define USART_CR2_STOP1P5_BITS (3 << 12) /**< @brief CR2 1.5 stop bit value.*/
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
#if STM32_SERIAL_USE_USART1 && !defined(__DOXYGEN__)
extern SerialDriver SD1;
#endif
#if STM32_SERIAL_USE_USART2 && !defined(__DOXYGEN__)
extern SerialDriver SD2;
#endif
#if STM32_SERIAL_USE_USART3 && !defined(__DOXYGEN__)
extern SerialDriver SD3;
#endif
#if STM32_SERIAL_USE_UART4 && !defined(__DOXYGEN__)
extern SerialDriver SD4;
#endif
#if STM32_SERIAL_USE_UART5 && !defined(__DOXYGEN__)
extern SerialDriver SD5;
#endif
#if STM32_SERIAL_USE_USART6 && !defined(__DOXYGEN__)
extern SerialDriver SD6;
#endif
#ifdef __cplusplus
extern "C" {
#endif
void sd_lld_init(void);
void sd_lld_start(SerialDriver *sdp, const SerialConfig *config);
void sd_lld_stop(SerialDriver *sdp);
#ifdef __cplusplus
}
#endif
#endif /* HAL_USE_SERIAL */
#endif /* _SERIAL_LLD_H_ */
/** @} */
|
